Water hardness in Medina County, OH
Water in Medina County is very hard, with a median of 254 mg/L (14.8 grains per gallon) across 63 monitoring sites.
Medina County water at a glance
- HardnessVery hard (254 mg/L, 14.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 254 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.8 gpg (14.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Medina County
Prefilled with Medina County's measured local hardness of 254 mg/L (14.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Medina County on the Ohio map
Cities and communities in Medina County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Brunswick | 217 | Very hard | 67 sites within 10 miles |
| Medina | 252 | Very hard | 33 sites within 10 miles |
| Wadsworth | 248 | Very hard | 72 sites within 10 miles |
| Lodi | 314 | Very hard | 41 sites within 10 miles |
| Seville | 286 | Very hard | 58 sites within 10 miles |
| Creston | 289 | Very hard | 57 sites within 10 miles |
| Westfield Center | 289 | Very hard | 49 sites within 10 miles |
| Spencer | 289 | Very hard | 41 sites within 10 miles |
| Chippewa Lake | 278 | Very hard | 52 sites within 10 miles |
| Gloria Glens Park | 282 | Very hard | 54 sites within 10 miles |
| Sharon Center (CDP) | 247 | Very hard | 73 sites within 10 miles |
| Valley City (CDP) | 220 | Very hard | 58 sites within 10 miles |
Water quality in Medina County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Medina | Medina City PWS | 1 found | 0 lead · 50 unknown | None |
| Wadsworth | Wadsworth City PWS | None detected | 351 lead · 1,863 unknown | None |
| Lodi | Lodi Village PWS | Not tested | 4 lead · 576 unknown | None |
| Seville | Seville Village PWS | Not tested | 0 lead · 0 unknown | 1 |
| Creston | Creston Village | Not tested | 1 lead · 1 unknown | 1 (1 open) |
| Spencer | Village of Spencer | Not tested | 0 lead · 141 unknown | None |
Neighboring counties
- Summit County236 mg/L
- Wayne County250 mg/L
- Lorain County227 mg/L
- Ashland County276 mg/L
- Cuyahoga County201 mg/L
- Stark County290 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.