Water hardness in Thomasville, NC
Water in Thomasville is moderately hard, with a median of 62 mg/L (3.6 grains per gallon) across 5 monitoring sites within 10 miles.
Thomasville tap water at a glance
- HardnessModerately hard (62 mg/L, 3.6 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- PFAS1 found; the highest PFOS result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesNo known lead lines; 6,696 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 62 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 3.6 gpg (3.5 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Thomasville
Prefilled with Thomasville's measured local hardness of 62 mg/L (3.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Thomasville tap water
City of Thomasville is the main public water system for Thomasville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jul 2024 – Apr 2025. 1 PFAS was detected. The highest PFOS result was above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFOS perfluorooctane sulfonic acid | 4.7 ppt | 3 of 4 samples | 4 ppt |
Other water systems serving parts of Thomasville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Davidson Water INC serves over 10,000 people | None detected | — | Jan 2023 – Oct 2023 |
| City of High Point serves over 10,000 people | PFOS, PFPeA, PFHxS +3 more | 4.2 / 11 ppt | Nov 2024 – Aug 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Thomasville
City of Thomasville reported 12,055 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 6,696 lines are still of unknown material.
Other water systems serving parts of Thomasville
| Water system | Service lines | Total |
|---|---|---|
| Davidson Water INC | 0 lead · 0 galvanized · 0 unknown | 67,226 |
| City of High Point | 0 lead · 226 galvanized · 0 unknown | 43,340 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Thomasville drinking water violations
EPA records show no health-based violations for City of Thomasville since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Thomasville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Davidson Water INC | None | 3 |
| City of High Point | 1 | 2 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Thomasville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| RICH FORK AT SR 1800 NR THOMASVILLE NCDENR-DWQ (2nd) | River/Stream | 4 mi | 86 mg/L | 10 | 2000–2001 |
| RICH FORK AT SR 1800 NR THOMASVILLE North Carolina Dept of Environmental Quality NCDEQ-DWR WQX | River/Stream | 4 mi | 62 mg/L | 18 | 2010–2025 |
| HAMBY CRK AT SR 2790 NR HOLLY GROVE NCDENR-DWQ (2nd) | River/Stream | 6.1 mi | 69 mg/L | 11 | 2000–2001 |
| LAKE THOM-A-LEX North Carolina Dept of Environmental Quality NCDEQ-DWR WQX | Lake | 6.2 mi | 39 mg/L | 33 | 2006–2016 |
| HAMBY CRK AT SR 2790 NR HOLLY GROVE North Carolina Dept of Environmental Quality NCDEQ-DWR WQX | River/Stream | 6.2 mi | 57 mg/L | 31 | 2010–2025 |
Water hardness in towns near Thomasville
| Town | Distance | Median | Class |
|---|---|---|---|
| Archdale | 7 mi | 45 mg/L | Soft |
| High Point | 9 mi | 44 mg/L | Soft |
| Lexington | 12 mi | 44 mg/L | Soft |
| Kernersville | 16 mi | 36 mg/L | Soft |
| Winston-Salem | 18 mi | 44 mg/L | Soft |
| Asheboro | 19 mi | 48 mg/L | Soft |
| Clemmons | 20 mi | 47 mg/L | Soft |
| Greensboro | 21 mi | 48 mg/L | Soft |
| Summerfield | 24 mi | 30 mg/L | Soft |
| Lewisville | 25 mi | 47 mg/L | Soft |
Davidson County
Thomasville is in Davidson County, where the median is 46 mg/L (soft) across 17 sites.
See all of Davidson County →North Carolina
The statewide median is 33 mg/L (soft) from 1,749 sites.
North Carolina hardness map →Thomasville, NC water: common questions
Do I need a water softener in Thomasville?
Probably not. Water measured around Thomasville is 3.6 gpg (62 mg/L, measured locally), under the 7 gpg (120 mg/L) level where scale on fixtures and appliances becomes noticeable. If spotting bothers you, about 7,000 grains of capacity covers a 3-person home between weekly regenerations.Size it for your household →
Who supplies Thomasville's drinking water?
The main public water system serving Thomasville in EPA records is City of Thomasville. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Thomasville?
It depends on what you want to remove. In Thomasville, EPA testing found PFOS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Which water filters remove PFAS?EPA tests found 1 PFAS in Thomasville's main water system.
- How to tell if your home has a lead pipe6,696 service lines here are of unknown material.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.