Water hardness in Maryville, MO
Water in Maryville is very hard, with a median of 194 mg/L (11.4 grains per gallon) across Nodaway County.
There are not enough monitoring sites within 10 miles of Maryville, so this page uses the Nodaway County median.
Maryville tap water at a glance
- HardnessVery hard (194 mg/L, 11.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesThe water system reported 6 lead service lines.Check your own pipe →
- Violations4 health-based violations since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 194 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 11.4 gpg (10.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Maryville
Prefilled with Maryville's measured local hardness of 194 mg/L (11.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Maryville tap water
Maryville PWS is the main public water system for Maryville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2024 – Nov 2024. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 8.7 ppt | 2 of 3 samples | — |
Other water systems serving parts of Maryville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Nodaway County PWSD 1 serves 10,000 people or fewer | PFBA | — | Jan 2024 – Oct 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Maryville
Maryville PWS reported 4,277 service lines (the pipes connecting homes to the water main) in its inventory. 6 are lead and 0 are galvanized lines that must be replaced, and 4,074 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Maryville PWS whether your address is on its list.
Other water systems serving parts of Maryville
| Water system | Service lines | Total |
|---|---|---|
| Nodaway County PWSD 1 | 0 lead · 0 galvanized · 0 unknown | 3,325 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Maryville drinking water violations
EPA records show 4 health-based violations for Maryville PWS since 2016, all since resolved or closed. The most recent began in Dec 2025. It also had 9 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Surface water treatment (filtration/turbidity) filtration requirements that protect against microbes such as Cryptosporidium | Treatment requirement not met | 1 | Dec 2025 | Resolved/closed |
| Chlorite a byproduct of chlorine dioxide disinfection highest measured 1.3 MG/L; limit 1.0 mg/L | Contaminant above legal limit | 2 | Mar 2024 | Resolved/closed |
| Surface water treatment (Long Term 2 rule) extra treatment or covered reservoirs to protect against microbes | Treatment requirement not met | 1 | Dec 2022 | Resolved/closed |
Other water systems serving parts of Maryville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Nodaway County PWSD 1 | 1 | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Maryville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Long Br. @ CR 320 Missouri Dept. of Natural Resources | River/Stream | 8.1 mi | 185 mg/L | 1 | 2012 |
| Long Br. bl Hwy VV Br. Missouri Dept. of Natural Resources | River/Stream | 8.7 mi | 208 mg/L | 25 | 2006–2013 |
Water hardness in towns near Maryville
| Town | Distance | Median | Class |
|---|---|---|---|
| St. Joseph | 40 mi | 278 mg/L | Very hard |
| Smithville | 67 mi | 524 mg/L | Very hard |
| Kearney | 73 mi | 524 mg/L | Very hard |
| Excelsior Springs | 77 mi | 524 mg/L | Very hard |
| Liberty | 80 mi | 451 mg/L | Very hard |
| Gladstone | 80 mi | 434 mg/L | Very hard |
| Kansas City | 86 mi | 100 mg/L | Moderately hard |
| Independence | 91 mi | 123 mg/L | Hard |
| Raytown | 96 mi | 242 mg/L | Very hard |
| Blue Springs | 97 mi | 224 mg/L | Very hard |
Nodaway County
Maryville is in Nodaway County, where the median is 194 mg/L (very hard) across 9 sites.
See all of Nodaway County →Maryville, MO water: common questions
Do I need a water softener in Maryville?
Very likely. Water measured around Maryville is 11.4 gpg (194 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 20,000 grains.Size it for your household →
Who supplies Maryville's drinking water?
The main public water system serving Maryville in EPA records is Maryville PWS. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Maryville?
It depends on what you want to remove. In Maryville, EPA testing found PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 6 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 4 health-based violations since 2016, for the Interim Enhanced Surface Water Treatment Rule and Chlorite and more; the utility's annual report says what was done about them. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Maryville's main water system.
- How to tell if your home has a lead pipe6 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.