Water hardness in Kirksville, MO
Water in Kirksville is very hard, with a median of 202 mg/L (11.8 grains per gallon) across 3 monitoring sites within 10 miles.
Kirksville tap water at a glance
- HardnessVery hard (202 mg/L, 11.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo known lead lines; 7,434 lines are still of unknown material.Check your own pipe →
- Violations3 health-based violations since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 202 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 11.8 gpg (11.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Kirksville
Prefilled with Kirksville's measured local hardness of 202 mg/L (11.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Kirksville tap water
Kirksville PWS is the main public water system for Kirksville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2024 – Dec 2024. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 8.2 ppt | 3 of 4 samples | — |
Other water systems serving parts of Kirksville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Adair County PWSD 1 serves 10,000 people or fewer | PFBA | — | Mar 2024 – Dec 2024 |
| Knox County Public Water & Sewer Dist 1 serves 10,000 people or fewer | PFBA | — | Feb 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Kirksville
Kirksville PWS reported 7,890 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 7,434 lines are still of unknown material.
Other water systems serving parts of Kirksville
| Water system | Service lines | Total |
|---|---|---|
| Adair County PWSD 1 | 0 lead · 0 galvanized · 1,231 unknown | 3,968 |
| Knox County Public Water & Sewer Dist 1 | 0 lead · 0 galvanized · 1,780 unknown | 1,794 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Kirksville drinking water violations
EPA records show 3 health-based violations for Kirksville PWS since 2016, all since resolved or closed. The most recent began in Apr 2022.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Total trihalomethanes (TTHM) byproducts formed when chlorine reacts with natural matter in water · what it means highest measured 85 UG/L; limit 0.080 mg/L | Contaminant above legal limit | 2 | Apr 2022 | Resolved/closed |
| Total organic carbon removal treatment that limits the matter disinfection byproducts form from | Treatment requirement not met | 1 | Apr 2017 | Resolved/closed |
Other water systems serving parts of Kirksville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Adair County PWSD 1 | None | 0 |
| Knox County Public Water & Sewer Dist 1 | None | 12 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Kirksville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Bear Cr. at Desoto Ln. Missouri Dept. of Natural Resources | River/Stream | 5.4 mi | 202 mg/L | 4 | 2020–2022 |
| Bear Cr. at Hwy. KK Missouri Dept. of Natural Resources | River/Stream | 7.5 mi | 201 mg/L | 4 | 2020–2022 |
| Spring Cr. 0.75 mi.NW of Novinger Missouri Dept. of Natural Resources | River/Stream | 8.2 mi | 234 mg/L | 3 | 2004–2005 |
Water hardness in towns near Kirksville
| Town | Distance | Median | Class |
|---|---|---|---|
| Moberly | 54 mi | 910 mg/L | Very hard |
| Hannibal | 71 mi | 171 mg/L | Hard |
| Mexico | 81 mi | 148 mg/L | Hard |
| Marshall | 82 mi | 160 mg/L | Hard |
| Columbia | 87 mi | 315 mg/L | Very hard |
| Fulton | 99 mi | 212 mg/L | Very hard |
| Excelsior Springs | 107 mi | 524 mg/L | Very hard |
| Sedalia | 109 mi | 221 mg/L | Very hard |
| Kearney | 111 mi | 524 mg/L | Very hard |
| Jefferson City | 115 mi | 224 mg/L | Very hard |
Adair County
Kirksville is in Adair County, where the median is 205 mg/L (very hard) across 4 sites.
See all of Adair County →Kirksville, MO water: common questions
Do I need a water softener in Kirksville?
Very likely. Water measured around Kirksville is 11.8 gpg (202 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 21,000 grains.Size it for your household →
Who supplies Kirksville's drinking water?
The main public water system serving Kirksville in EPA records is Kirksville PWS. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Kirksville?
It depends on what you want to remove. In Kirksville, EPA testing found PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 3 health-based violations since 2016, for TTHM and Total Carbon; the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Kirksville's main water system.
- How to tell if your home has a lead pipe7,434 service lines here are of unknown material.
- TTHM in drinking waterDisinfection byproducts appear in this system's violation record.