Water hardness in Hyattsville, MD

Water in Hyattsville is hard, with a median of 132 mg/L (7.7 grains per gallon) across 24 monitoring sites within 10 miles.

136% harder than the Maryland median (56 mg/L) 33rd hardest of 121 Maryland towns Population 20,662
132mg/L
7.7 grains per gallon
Hard

Hyattsville tap water at a glance

  • HardnessHard (132 mg/L, 7.7 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 132 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.7 gpg (7.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites24
Lab samples29
Sample years2000–2016
Middle 50% of sites71–181 mg/L
Groundwater (wells, springs)166 mg/L · 12 sites
Surface water (rivers, lakes)90 mg/L · 12 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Hyattsville

Prefilled with Hyattsville's measured local hardness of 132 mg/L (7.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Hyattsville tap water

Hyattsville is served by more than one water system. These systems supply ZIP codes in Hyattsville and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.

Water systems serving Hyattsville

Water systemPFAS detectedHighest PFOA / PFOSTested
Washington Suburban Sanitary Commission
serves over 10,000 people
PFPeA, PFHxA — Mar 2023 – Jun 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Hyattsville

Hyattsville is served by more than one water system. Their service line inventories, as reported to EPA:

Water systems serving Hyattsville

Water systemService linesTotal
Washington Suburban Sanitary Commission8 lead · 1,277 galvanized · 57,121 unknown58,406

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Hyattsville drinking water violations

Hyattsville is served by more than one water system. Health-based violations recorded by EPA since 2016:

Water systems serving Hyattsville

Water systemHealth-based violationsMonitoring/reporting
Washington Suburban Sanitary CommissionNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Hyattsville

SiteTypeDistanceMedianSamplesYears
NORTHWEST BR ANACOSTIA RIVER NR HYATTSVILLE, MD
USGS Maryland Water Science Center
Stream 0.8 mi105 mg/L12007
NORTHEAST BRANCH ANACOSTIA RIVER AT RIVERDALE, MD
USGS Maryland Water Science Center
Stream 1.6 mi60 mg/L12007
PG Cc 31
USGS Maryland Water Science Center
Well 1.7 mi180 mg/L12003
BALD MILL BRANCH AT LANHAM, MD
USGS Maryland Water Science Center
Stream 5.8 mi103 mg/L12000
PG Cd 25
USGS Maryland Water Science Center
Well 5.9 mi5 mg/L12016
MO Ff 19
USGS Maryland Water Science Center
Well 7.4 mi158 mg/L12014

Water hardness in towns near Hyattsville

TownDistanceMedianClass
Chillum1 mi 161 mg/LHard
East Riverdale2 mi 67 mg/LModerately hard
Langley Park2 mi 164 mg/LHard
Adelphi3 mi 161 mg/LHard
College Park3 mi 103 mg/LModerately hard
Takoma Park3 mi 166 mg/LHard
New Carrollton4 mi 60 mg/LModerately hard
Greenbelt4 mi 60 mg/LModerately hard
Landover4 mi 60 mg/LModerately hard
Silver Spring5 mi 167 mg/LHard

Prince George's County

Hyattsville is in Prince George's County, where the median is 60 mg/L (moderately hard) across 27 sites.

See all of Prince George's County →

Maryland

The statewide median is 56 mg/L (soft) from 1,412 sites.

Maryland hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next