Water hardness in Sulphur, LA
Water in Sulphur is moderately hard, with a median of 81 mg/L (4.7 grains per gallon) across 12 monitoring sites within 10 miles.
Sulphur tap water at a glance
- HardnessModerately hard (81 mg/L, 4.7 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo known lead lines; 889 lines are still of unknown material.Check your own pipe →
- Violations1 health-based violation since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 81 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 4.7 gpg (4.5 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Sulphur
Prefilled with Sulphur's measured local hardness of 81 mg/L (4.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Sulphur tap water
Sulphur City of Water System is the main public water system for Sulphur. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2024 – Jul 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Sulphur
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Calcasieu Parish WW Dist 9 Carlyss serves over 10,000 people | None detected | — | Oct 2023 – Apr 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Sulphur
Sulphur City of Water System reported 8,330 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 23 are galvanized lines that must be replaced, and 889 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Sulphur City of Water System whether your address is on its list.
Other water systems serving parts of Sulphur
| Water system | Service lines | Total |
|---|---|---|
| Calcasieu Parish WW Dist 9 Carlyss | 0 lead · 0 galvanized · 0 unknown | 5,247 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Sulphur drinking water violations
EPA records show 1 health-based violation for Sulphur City of Water System since 2016, all since resolved or closed. The most recent began in Jan 2020. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Groundwater Rule requirements to protect well water from fecal contamination | Treatment requirement not met | 1 | Jan 2020 | Resolved/closed |
Other water systems serving parts of Sulphur
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Calcasieu Parish WW Dist 9 Carlyss | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Sulphur
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Cu-74 USGS Louisiana Water Science Center | Well | 3.4 mi | 117 mg/L | 1 | 2017 |
| Cu-7967Z USGS Louisiana Water Science Center | Well | 4 mi | 83 mg/L | 2 | 2000–2008 |
| Cu-1385 USGS Louisiana Water Science Center | Well | 4.3 mi | 120 mg/L | 16 | 2003–2015 |
| Houston River Northeast of Sulphur, Louisiana LDEQ/Water Planning and Assessment (Louisiana) (State) | River/Stream | 4.9 mi | 32 mg/L | 55 | 2007–2024 |
| Cu-1096 USGS Louisiana Water Science Center | Well | 6.4 mi | 79 mg/L | 1 | 2017 |
| Little River East of Buhler, Louisiana LDEQ/Water Planning and Assessment (Louisiana) (State) | River/Stream | 7 mi | 36 mg/L | 61 | 2007–2024 |
Water hardness in towns near Sulphur
| Town | Distance | Median | Class |
|---|---|---|---|
| Lake Charles | 9 mi | 118 mg/L | Moderately hard |
| Moss Bluff | 10 mi | 73 mg/L | Moderately hard |
| Crowley | 59 mi | 202 mg/L | Very hard |
| Abbeville | 76 mi | 168 mg/L | Hard |
| Opelousas | 79 mi | 78 mg/L | Moderately hard |
| Carencro | 79 mi | 106 mg/L | Moderately hard |
| Lafayette | 79 mi | 98 mg/L | Moderately hard |
| Youngsville | 82 mi | 95 mg/L | Moderately hard |
| Broussard | 84 mi | 94 mg/L | Moderately hard |
| Alexandria | 90 mi | 40 mg/L | Soft |
Calcasieu Parish
Sulphur is in Calcasieu Parish, where the median is 73 mg/L (moderately hard) across 27 sites.
See all of Calcasieu Parish →Sulphur, LA water: common questions
Do I need a water softener in Sulphur?
Probably not. Water measured around Sulphur is 4.7 gpg (81 mg/L, measured locally), under the 7 gpg (120 mg/L) level where scale on fixtures and appliances becomes noticeable. If spotting bothers you, about 9,000 grains of capacity covers a 3-person home between weekly regenerations.Size it for your household →
Who supplies Sulphur's drinking water?
The main public water system serving Sulphur in EPA records is Sulphur City of Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Sulphur?
It depends on what you want to remove. In Sulphur, the system had 1 health-based violation since 2016, for the Groundwater Rule; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →
Hardness scale
What to read next
- How to tell if your home has a lead pipe889 service lines here are of unknown material.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.