Water hardness in Johnston, IA
Water in Johnston is very hard, with a median of 300 mg/L (17.6 grains per gallon) across 13 monitoring sites within 10 miles.
Johnston tap water at a glance
- HardnessVery hard (300 mg/L, 17.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 300 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 17.6 gpg (16.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Johnston
Prefilled with Johnston's measured local hardness of 300 mg/L (17.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Johnston tap water
Johnston Municipal Water Supply is the main public water system for Johnston. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Jan 2025 – Oct 2025. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Johnston
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Des Moines Water Works serves over 10,000 people | None detected | — | Feb 2023 – Nov 2023 |
| Grimes Water Supply serves over 10,000 people | None detected | — | May 2024 – Aug 2025 |
| Urbandale Water Utility serves over 10,000 people | None detected | — | Aug 2023 – May 2024 |
| Warren Water District serves over 10,000 people | None detected | — | Dec 2023 – Sep 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Johnston
Johnston Municipal Water Supply reported 5,506 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Johnston
| Water system | Service lines | Total |
|---|---|---|
| Des Moines Water Works | 8,114 lead · 10 galvanized · 45,950 unknown | 90,731 |
| Grimes Water Supply | 0 lead · 7 galvanized · 0 unknown | 6,016 |
| Urbandale Water Utility | 0 lead · 0 galvanized · 0 unknown | 17,723 |
| Warren Water District | 0 lead · 0 galvanized · 103 unknown | 8,644 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Johnston drinking water violations
EPA records show no health-based violations for Johnston Municipal Water Supply since 2016.
Other water systems serving parts of Johnston
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Des Moines Water Works | 1 | 1 |
| Grimes Water Supply | None | 1 |
| Urbandale Water Utility | None | 0 |
| Warren Water District | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Johnston
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Saylorville Reservoir - Surface Depth Des Moines River - Corp of Engineers (IOWA) | Lake | 2.4 mi | 297 mg/L | 32 | 2001–2002 |
| Saylorville Reservoir - Bottom Depth Des Moines River - Corp of Engineers (IOWA) | Lake | 2.4 mi | 300 mg/L | 30 | 2001–2002 |
| Saylorville Reservoir - Bottom Depth Des Moines River - Corp of Engineers (IOWA) | Lake | 2.4 mi | 300 mg/L | 30 | 2001–2002 |
| Saylorville Reservoir - Surface Depth Des Moines River - Corp of Engineers (IOWA) | Lake | 2.4 mi | 297 mg/L | 32 | 2001–2002 |
| Station #5, Des Moines River at 66th. St. Des Moines River - Corp of Engineers (IOWA) | River/Stream | 3 mi | 302 mg/L | 44 | 2000–2002 |
| Station #5, Des Moines River at 66th. St. Des Moines River - Corp of Engineers (IOWA) | River/Stream | 3 mi | 302 mg/L | 44 | 2000–2002 |
Water hardness in towns near Johnston
| Town | Distance | Median | Class |
|---|---|---|---|
| Grimes | 4 mi | 302 mg/L | Very hard |
| Urbandale | 5 mi | 302 mg/L | Very hard |
| Clive | 7 mi | 300 mg/L | Very hard |
| Ankeny | 7 mi | 299 mg/L | Very hard |
| Des Moines | 10 mi | 301 mg/L | Very hard |
| West Des Moines | 10 mi | 379 mg/L | Very hard |
| Waukee | 11 mi | 379 mg/L | Very hard |
| Pleasant Hill | 13 mi | 286 mg/L | Very hard |
| Altoona | 13 mi | 293 mg/L | Very hard |
| Norwalk | 14 mi | 300 mg/L | Very hard |
Polk County
Johnston is in Polk County, where the median is 299 mg/L (very hard) across 22 sites.
See all of Polk County →Johnston, IA water: common questions
Do I need a water softener in Johnston?
Very likely. Water measured around Johnston is 17.6 gpg (300 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →
Who supplies Johnston's drinking water?
The main public water system serving Johnston in EPA records is Johnston Municipal Water Supply. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Johnston?
Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.