Water hardness in Clive, IA

Water in Clive is very hard, with a median of 300 mg/L (17.6 grains per gallon) across 11 monitoring sites within 10 miles.

9% softer than the Iowa median (330 mg/L) 25th hardest of 42 Iowa towns Population 19,005
300mg/L
17.6 grains per gallon
Very hard

Clive tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 300 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.6 gpg (16.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites11
Lab samples303
Sample years2000–2005
Middle 50% of sites297–341 mg/L
Groundwater (wells, springs)430 mg/L · 3 sites
Surface water (rivers, lakes)299 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Clive

Prefilled with Clive's measured local hardness of 300 mg/L (17.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Clive tap water

Clive Water Department is the main public water system for Clive. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Oct 2023 – Jul 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Clive

Water systemPFAS detectedHighest PFOA / PFOSTested
Des Moines Water Works
serves over 10,000 people
None detected — Feb 2023 – Nov 2023
West Des Moines Water Works
serves over 10,000 people
None detected — Nov 2023 – Aug 2024
Warren Water District
serves over 10,000 people
None detected — Dec 2023 – Sep 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Clive

Clive Water Department reported 6,846 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 45 are galvanized lines that must be replaced.

0lead (0%)
45galvanized requiring replacement
0unknown material (0%)
6,801not lead (99%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Clive Water Department whether your address is on its list.

Other water systems serving parts of Clive

Water systemService linesTotal
Des Moines Water Works8,114 lead · 10 galvanized · 45,950 unknown90,731
West Des Moines Water Works0 lead · 59 galvanized · 4,590 unknown18,980
Warren Water District0 lead · 0 galvanized · 103 unknown8,644

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Clive drinking water violations

EPA records show no health-based violations for Clive Water Department since 2016.

Other water systems serving parts of Clive

Water systemHealth-based violationsMonitoring/reporting
Des Moines Water Works11
West Des Moines Water WorksNone0
Warren Water DistrictNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Clive

SiteTypeDistanceMedianSamplesYears
078N25W10CDDC 19416 1967West Des Moines 1
USGS Iowa Water Science Center
Well 4.8 mi379 mg/L12005
078N25W15CAAC 1954West Des Moines 9
USGS Iowa Water Science Center
Well 5.2 mi480 mg/L12004
Station #5, Des Moines River at 66th. St.
Des Moines River - Corp of Engineers (IOWA)
River/Stream 8.1 mi302 mg/L442000–2002
Station #5, Des Moines River at 66th. St.
Des Moines River - Corp of Engineers (IOWA)
River/Stream 8.1 mi302 mg/L442000–2002
Saylorville Reservoir - Surface Depth
Des Moines River - Corp of Engineers (IOWA)
Lake 8.8 mi297 mg/L322001–2002
Saylorville Reservoir - Bottom Depth
Des Moines River - Corp of Engineers (IOWA)
Lake 8.8 mi300 mg/L302001–2002

Water hardness in towns near Clive

TownDistanceMedianClass
Urbandale2 mi 302 mg/LVery hard
West Des Moines4 mi 379 mg/LVery hard
Grimes4 mi 302 mg/LVery hard
Waukee5 mi 379 mg/LVery hard
Johnston7 mi 300 mg/LVery hard
Des Moines10 mi 301 mg/LVery hard
Norwalk10 mi 300 mg/LVery hard
Ankeny13 mi 299 mg/LVery hard
Pleasant Hill15 mi 286 mg/LVery hard
Altoona17 mi 293 mg/LVery hard

Polk County

Clive is in Polk County, where the median is 299 mg/L (very hard) across 22 sites.

See all of Polk County →

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Clive, IA water: common questions

Do I need a water softener in Clive?

Very likely. Water measured around Clive is 17.6 gpg (300 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →

Who supplies Clive's drinking water?

The main public water system serving Clive in EPA records is Clive Water Department. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Clive?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next