Water hardness in Bensenville, IL
Water in Bensenville is very hard, with a median of 283 mg/L (16.5 grains per gallon) across 12 monitoring sites within 10 miles.
Bensenville tap water at a glance
- HardnessVery hard (283 mg/L, 16.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 600 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 283 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 16.5 gpg (15.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Bensenville
Prefilled with Bensenville's measured local hardness of 283 mg/L (16.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Bensenville tap water
The City of Bensenville water system is the main public water system for Bensenville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2023 – Feb 2025. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Bensenville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Franklin Park serves over 10,000 people | None detected | — | Jul 2023 – Apr 2024 |
| Leyden TWSP Water District serves over 10,000 people | None detected | — | Mar 2024 – Dec 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Bensenville
The City of Bensenville water system reported 4,883 service lines (the pipes connecting homes to the water main) in its inventory. 600 are lead and 81 are galvanized lines that must be replaced.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Bensenville water system whether your address is on its list.
Other water systems serving parts of Bensenville
| Water system | Service lines | Total |
|---|---|---|
| Franklin Park | 1,964 lead · 0 galvanized · 1,927 unknown | 5,986 |
| Leyden TWSP Water District | 110 lead · 93 galvanized · 3 unknown | 2,993 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Bensenville drinking water violations
EPA records show no health-based violations for the City of Bensenville water system since 2016. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Bensenville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Franklin Park | None | 5 |
| Leyden TWSP Water District | None | 5 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Bensenville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Des Plaines River illinois epa (State) | River/Stream | 4.6 mi | 286 mg/L | 24 | 2000–2002 |
| SALT CREEK AT ELK GROVE VILLAGE, IL USGS Illinois Water Science Center | Stream | 4.7 mi | 201 mg/L | 1 | 2000 |
| WILLOW CREEK AT DES PLAINES R RD NR ROSEMONT, IL USGS Illinois Water Science Center | Stream | 4.8 mi | 270 mg/L | 1 | 2000 |
| Addison Creek illinois epa (State) | River/Stream | 6.5 mi | 306 mg/L | 24 | 2000–2002 |
| ADDISON CREEK AT BELLWOOD, IL USGS Illinois Water Science Center | Stream | 6.5 mi | 237 mg/L | 1 | 2000 |
| Des Plaines River illinois epa (State) | River/Stream | 8 mi | 312 mg/L | 23 | 2000–2002 |
Water hardness in towns near Bensenville
| Town | Distance | Median | Class |
|---|---|---|---|
| Wood Dale | 2 mi | 278 mg/L | Very hard |
| Northlake | 4 mi | 279 mg/L | Very hard |
| Franklin Park | 4 mi | 276 mg/L | Very hard |
| Schiller Park | 4 mi | 275 mg/L | Very hard |
| Addison | 4 mi | 286 mg/L | Very hard |
| Elk Grove Village | 4 mi | 278 mg/L | Very hard |
| Elmhurst | 4 mi | 282 mg/L | Very hard |
| Villa Park | 5 mi | 282 mg/L | Very hard |
| Melrose Park | 6 mi | 277 mg/L | Very hard |
| Des Plaines | 6 mi | 255 mg/L | Very hard |
DuPage County
Bensenville is in DuPage County, where the median is 287 mg/L (very hard) across 5 sites.
See all of DuPage County →Bensenville, IL water: common questions
Do I need a water softener in Bensenville?
Very likely. Water measured around Bensenville is 16.5 gpg (283 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →
Who supplies Bensenville's drinking water?
The main public water system serving Bensenville in EPA records is Bensenville. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Bensenville?
It depends on what you want to remove. In Bensenville, the system reports 600 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe600 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.