Water hardness in Kaysville, UT

Water in Kaysville is very hard, with a median of 220 mg/L (12.8 grains per gallon) across 42 monitoring sites within 10 miles.

14% softer than the Utah median (256 mg/L) 57th hardest of 67 Utah towns Population 32,941
220mg/L
12.8 grains per gallon
Very hard

Kaysville tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 220 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 12.8 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites42
Lab samples1,188
Sample years2000–2021
Middle 50% of sites71–281 mg/L
Groundwater (wells, springs)136 mg/L · 10 sites
Surface water (rivers, lakes)241 mg/L · 32 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Kaysville

Prefilled with Kaysville's measured local hardness of 220 mg/L (12.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Kaysville tap water

Kaysville City Water System is the main public water system for Kaysville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2024 – May 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Kaysville

Water systemPFAS detectedHighest PFOA / PFOSTested
Farmington City Water System
serves over 10,000 people
6:2 FTS — Sep 2023 – Aug 2024
Lagoon Investment Company
serves over 10,000 people
None detected — Feb 2024 – Jul 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Kaysville

Kaysville City Water System reported 9,399 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
9,399not lead (100%)

Other water systems serving parts of Kaysville

Water systemService linesTotal
Farmington City Water System0 lead · 0 galvanized · 0 unknown4,824
Lagoon Investment Company0 lead · 0 galvanized · 0 unknown55

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Kaysville drinking water violations

EPA records show no health-based violations for Kaysville City Water System since 2016. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Kaysville

Water systemHealth-based violationsMonitoring/reporting
Farmington City Water SystemNone1
Lagoon Investment Company10

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Kaysville

SiteTypeDistanceMedianSamplesYears
HOLMES CREEK AT MAIN STREET, LAYTON, UT
USGS Utah Water Science Center
Stream 0.9 mi204 mg/L22000
HOLMES CK @ TERESA ST XING
Utah Department Of Environmental Quality
River/Stream 1.2 mi272 mg/L722009–2015
N. Fork Holmes Cr. at Main St. Layton, UT
USGS Utah Water Science Center
Stream 1.3 mi254 mg/L22000
Baer Creek at frontage road Kaysville, UT
USGS Utah Water Science Center
Stream 1.3 mi282 mg/L22000
KAYS CK AB ANGEL ST
Utah Department Of Environmental Quality
River/Stream 2.3 mi287 mg/L12006
KAYS CK AT ANGEL ST XING
Utah Department Of Environmental Quality
River/Stream 2.3 mi332 mg/L1482002–2015

Water hardness in towns near Kaysville

TownDistanceMedianClass
Layton3 mi 253 mg/LVery hard
Farmington4 mi 178 mg/LHard
Clearfield6 mi 254 mg/LVery hard
Syracuse8 mi 267 mg/LVery hard
Centerville8 mi 205 mg/LVery hard
Clinton10 mi 244 mg/LVery hard
South Ogden10 mi 203 mg/LVery hard
West Point10 mi 262 mg/LVery hard
Woods Cross11 mi 207 mg/LVery hard
Roy11 mi 244 mg/LVery hard

Davis County

Kaysville is in Davis County, where the median is 247 mg/L (very hard) across 51 sites.

See all of Davis County →

Utah

The statewide median is 256 mg/L (very hard) from 4,077 sites.

Utah hardness map →

Kaysville, UT water: common questions

Do I need a water softener in Kaysville?

Very likely. Water measured around Kaysville is 12.8 gpg (220 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →

Who supplies Kaysville's drinking water?

The main public water system serving Kaysville in EPA records is Kaysville City Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Kaysville?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next