Water hardness in Southlake, TX

Water in Southlake is hard, with a median of 138 mg/L (8.1 grains per gallon) across 23 monitoring sites within 10 miles.

29% softer than the Texas median (194 mg/L) 180th hardest of 251 Texas towns Population 31,137
138mg/L
8.1 grains per gallon
Hard

Southlake tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 138 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.1 gpg (7.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites23
Lab samples1,510
Sample years2000–2023
Middle 50% of sites129–146 mg/L
Surface water (rivers, lakes)138 mg/L · 23 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Southlake

Prefilled with Southlake's measured local hardness of 138 mg/L (8.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Southlake tap water

City of Southlake is the main public water system for Southlake. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Nov 2023 – Aug 2024. 6 PFAS were detected. The highest PFHxS and PFOS results were above EPA's drinking water limit (10 ppt / 4 ppt).

ChemicalHighest resultDetected inEPA limit
PFHxS
perfluorohexane sulfonic acid
10.7 ppt 4 of 4 samples 10 ppt*
PFBA
perfluorobutanoic acid
8.8 ppt 3 of 4 samples —
PFHxA
perfluorohexanoic acid
5.7 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
5.3 ppt 4 of 4 samples —
PFOS
perfluorooctane sulfonic acid
4.1 ppt 2 of 4 samples 4 ppt
PFBS
perfluorobutane sulfonic acid
3.7 ppt 2 of 4 samples —

Other water systems serving parts of Southlake

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Fort Worth
serves over 10,000 people
PFHxS, PFHxA, PFBA +4 more 8.3 / 7.3 ppt Jan 2023 – Jan 2024
City of Grapevine
serves over 10,000 people
PFHxA, PFPeA, PFBA +4 more 5.5 / 5 ppt Feb 2023 – Nov 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Southlake

City of Southlake reported 10,590 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
10,590not lead (100%)

Other water systems serving parts of Southlake

Water systemService linesTotal
City of Fort Worth0 lead · 32,590 galvanized · 0 unknown300,778
City of Grapevine0 lead · 7 galvanized · 0 unknown15,355

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Southlake drinking water violations

EPA records show 1 health-based violation for City of Southlake since 2016, all since resolved or closed. The most recent began in Jan 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Coliform bacteria (Total Coliform Rule)
bacteria that signal possible contamination of the system · what it means
Contaminant above legal limit 1 Jan 2016 Resolved/closed

Other water systems serving parts of Southlake

Water systemHealth-based violationsMonitoring/reporting
City of Fort Worth11
City of GrapevineNone2

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Southlake

SiteTypeDistanceMedianSamplesYears
GRAPEVINE LAKE AT MARINA
Texas Commission on Environmental Quality
Reservoir 2.6 mi128 mg/L292000–2003
Grapevine Lk Site CC nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 2.7 mi140 mg/L1402016–2023
Grapevine Lk at Oak Grove Pk W nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 3.4 mi128 mg/L462011–2023
Grapevine Lk Site DQ nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 3.9 mi140 mg/L1402016–2023
Grapevine Lk at Twin Coves Pk nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 4.1 mi137 mg/L1402016–2023
Grapevine Lk Site BC nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 4.1 mi128 mg/L242000–2003

Water hardness in towns near Southlake

TownDistanceMedianClass
Trophy Club3 mi 138 mg/LHard
Colleyville4 mi 140 mg/LHard
Grapevine4 mi 147 mg/LHard
Keller5 mi 138 mg/LHard
Flower Mound6 mi 130 mg/LHard
Roanoke6 mi 140 mg/LHard
Bedford8 mi 190 mg/LVery hard
North Richland Hills8 mi 168 mg/LHard
Watauga8 mi 168 mg/LHard
Euless8 mi 184 mg/LVery hard

Tarrant County

Southlake is in Tarrant County, where the median is 355 mg/L (very hard) across 59 sites.

See all of Tarrant County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Southlake, TX water: common questions

Do I need a water softener in Southlake?

Many homes here use one. Water measured around Southlake is 8.1 gpg (138 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 14,000 grains.Size it for your household →

Who supplies Southlake's drinking water?

The main public water system serving Southlake in EPA records is City of Southlake. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Southlake?

It depends on what you want to remove. In Southlake, EPA testing found PFHxS, PFBA and PFHxA and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for Coliform (TCR); the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next