Water hardness in Gallatin, TN
Water in Gallatin is very hard, with a median of 194 mg/L (11.3 grains per gallon) across 14 monitoring sites within 10 miles.
Gallatin tap water at a glance
- HardnessVery hard (194 mg/L, 11.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo known lead lines; 3,830 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 194 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 11.3 gpg (10.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Gallatin
Prefilled with Gallatin's measured local hardness of 194 mg/L (11.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Gallatin tap water
Gallatin Water Department is the main public water system for Gallatin. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2024 – Oct 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Gallatin
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Castalian Springs-Bethpage U D serves over 10,000 people | None detected | — | Jan 2023 – Oct 2023 |
| Hendersonville U D serves over 10,000 people | None detected | — | Mar 2024 – Dec 2024 |
| White House Utility District serves over 10,000 people | None detected | — | May 2023 – Feb 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Gallatin
Gallatin Water Department reported 19,565 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 927 are galvanized lines that must be replaced, and 3,830 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Gallatin Water Department whether your address is on its list.
Other water systems serving parts of Gallatin
| Water system | Service lines | Total |
|---|---|---|
| Castalian Springs-Bethpage U.D. | 0 lead · 0 galvanized · 0 unknown | 5,206 |
| Hendersonville U.D. | 0 lead · 0 galvanized · 0 unknown | 17,454 |
| White House Utility District | 0 lead · 0 galvanized · 17,729 unknown | 41,342 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Gallatin drinking water violations
EPA records show no health-based violations for Gallatin Water Department since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Gallatin
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Castalian Springs-Bethpage U D | None | 4 |
| Hendersonville U D | None | 1 |
| White House Utility District | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Gallatin
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| EAST CAMP CREEK Tennessee Department of Environment and Conservation | River/Stream | 0.9 mi | 213 mg/L | 1 | 2004 |
| TOWN CREEK Tennessee Department of Environment and Conservation | River/Stream | 1.5 mi | 197 mg/L | 1 | 2004 |
| 3OLD20004 U.S. Army Corps of Engineers, Nashville District | Reservoir | 4.8 mi | 88 mg/L | 65 | 2000–2014 |
| Station Camp Creek TDEC Division of Water Resources | River/Stream | 5.2 mi | 190 mg/L | 1 | 2010 |
| BLEDSOE CREEK EMBAYMENT OF OH LAKE Tennessee Department of Environment and Conservation | River/Stream | 7 mi | 205 mg/L | 2 | 2009 |
| DRAKES CREEK Tennessee Department of Environment and Conservation | River/Stream | 7.8 mi | 191 mg/L | 1 | 2004 |
Water hardness in towns near Gallatin
| Town | Distance | Median | Class |
|---|---|---|---|
| Hendersonville | 9 mi | 191 mg/L | Very hard |
| White House | 13 mi | 190 mg/L | Very hard |
| Mount Juliet | 13 mi | 198 mg/L | Very hard |
| Goodlettsville | 14 mi | 175 mg/L | Hard |
| Lebanon | 14 mi | 205 mg/L | Very hard |
| Portland | 15 mi | 147 mg/L | Hard |
| Hartsville/Trousdale County | 17 mi | 181 mg/L | Very hard |
| Nashville | 23 mi | 228 mg/L | Very hard |
| Springfield | 24 mi | 198 mg/L | Very hard |
| La Vergne | 25 mi | 218 mg/L | Very hard |
Sumner County
Gallatin is in Sumner County, where the median is 158 mg/L (hard) across 31 sites.
See all of Sumner County →Tennessee
The statewide median is 98 mg/L (moderately hard) from 3,359 sites.
Tennessee hardness map →Gallatin, TN water: common questions
Do I need a water softener in Gallatin?
Very likely. Water measured around Gallatin is 11.3 gpg (194 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 20,000 grains.Size it for your household →
Who supplies Gallatin's drinking water?
The main public water system serving Gallatin in EPA records is Gallatin Water Department. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Gallatin?
Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe3,830 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.