Water hardness in Nashville, TN

Water in Nashville is very hard, with a median of 228 mg/L (13.3 grains per gallon) across 56 monitoring sites within 10 miles.

133% harder than the Tennessee median (98 mg/L) 9th hardest of 66 Tennessee towns Population 687,788
228mg/L
13.3 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Nashville can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Nashville tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 228 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13.3 gpg (12.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites56
Lab samples752
Sample years2000–2023
Middle 50% of sites110–261 mg/L
Surface water (rivers, lakes)228 mg/L · 56 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Nashville

Prefilled with Nashville's measured local hardness of 228 mg/L (13.3 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Nashville tap water

Nashville Water Dept is the main public water system for Nashville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Feb 2023 – Nov 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Nashville

Water systemPFAS detectedHighest PFOA / PFOSTested
Harpeth Valley U D
serves over 10,000 people
None detected — Feb 2023 – Nov 2023
Madison Suburban UD
serves over 10,000 people
None detected — Feb 2023 – Oct 2023
Franklin Water Dept
serves over 10,000 people
PFBA — Sep 2024 – Jun 2025
Gladeville Utility District
serves over 10,000 people
None detected — Feb 2025 – May 2026
La Vergne Water System
serves over 10,000 people
PFBS, PFHxA, PFPeA +2 more 5.5 / ND ppt Apr 2023 – Jan 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Nashville

Metro Water Services reported 218,530 service lines (the pipes connecting homes to the water main) in its inventory. 2,818 are lead and 21,855 are galvanized lines that must be replaced, and 76,180 are still of unknown material.

2,818lead (1%)
21,855galvanized requiring replacement
76,180unknown material (35%)
117,677not lead (54%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Metro Water Services whether your address is on its list.

Other water systems serving parts of Nashville

Water systemService linesTotal
Harpeth Valley U.D.0 lead · 0 galvanized · 0 unknown19,093
Madison Suburban U.D.0 lead · 0 galvanized · 0 unknown21,748
Franklin Water Dept0 lead · 0 galvanized · 0 unknown18,907
Gladeville Utility District0 lead · 0 galvanized · 0 unknown8,806
La Vergne Water System0 lead · 0 galvanized · 0 unknown13,694

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Nashville drinking water violations

EPA records show no health-based violations for Nashville Water Dept since 2016. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Nashville

Water systemHealth-based violationsMonitoring/reporting
Harpeth Valley U DNone2
Madison Suburban UDNone2
Franklin Water Dept78
Gladeville Utility District25
La Vergne Water System33

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Nashville

SiteTypeDistanceMedianSamplesYears
3CHE20007
U.S. Army Corps of Engineers, Nashville District
Reservoir 2.7 mi91 mg/L362000–2014
CHE20007
U.S. Army Corps of Engineers, Nashville District
River/Stream 2.7 mi82 mg/L112016–2023
CHE20009
U.S. Army Corps of Engineers, Nashville District
River/Stream 3.7 mi83 mg/L42022–2023
EAST FORK BROWNS CREEK
Tennessee Department of Environment and Conservation
River/Stream 3.7 mi298 mg/L62001
3CHE10044
U.S. Army Corps of Engineers, Nashville District
River/Stream 3.9 mi255 mg/L322000–2014
CHE10044
U.S. Army Corps of Engineers, Nashville District
River/Stream 3.9 mi224 mg/L102016–2023

Water hardness in towns near Nashville

TownDistanceMedianClass
Goodlettsville12 mi 175 mg/LHard
Brentwood12 mi 237 mg/LVery hard
Hendersonville14 mi 191 mg/LVery hard
Mount Juliet15 mi 198 mg/LVery hard
Nolensville16 mi 246 mg/LVery hard
La Vergne16 mi 218 mg/LVery hard
Franklin18 mi 234 mg/LVery hard
Smyrna20 mi 220 mg/LVery hard
White House21 mi 190 mg/LVery hard
Springfield23 mi 198 mg/LVery hard

Davidson County

Nashville is in Davidson County, where the median is 224 mg/L (very hard) across 82 sites.

See all of Davidson County →

Tennessee

The statewide median is 98 mg/L (moderately hard) from 3,359 sites.

Tennessee hardness map →

Nashville, TN water: common questions

Do I need a water softener in Nashville?

Very likely. Water measured around Nashville is 13.3 gpg (228 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →

Who supplies Nashville's drinking water?

The main public water system serving Nashville in EPA records is Nashville Water Dept. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Nashville?

It depends on what you want to remove. In Nashville, the system reports 2,818 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next