Water hardness in Cleveland, TN
Water in Cleveland is hard, with a median of 156 mg/L (9.1 grains per gallon) across 40 monitoring sites within 10 miles.
Cleveland tap water at a glance
- HardnessHard (156 mg/L, 9.1 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo known lead lines; 15,476 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 156 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 9.1 gpg (8.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Cleveland
Prefilled with Cleveland's measured local hardness of 156 mg/L (9.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Cleveland tap water
Cleveland Utilities is the main public water system for Cleveland. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 16 samples taken Feb 2024 – Nov 2024. 3 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBS perfluorobutane sulfonic acid | 32.7 ppt | 6 of 16 samples | — |
| PFBA perfluorobutanoic acid | 10 ppt | 3 of 16 samples | — |
| PFPeA perfluoropentanoic acid | 3.3 ppt | 1 of 16 samples | — |
Other water systems serving parts of Cleveland
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Eastside Utility District serves over 10,000 people | PFBA | — | Sep 2023 – Jun 2024 |
| Ocoee Utility District serves over 10,000 people | PFBS, PFOA, PFPeA +3 more | 6 / 4.5 ppt | Jan 2023 – Oct 2023 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Cleveland
Cleveland Utilities reported 35,826 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 4 are galvanized lines that must be replaced, and 15,476 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Cleveland Utilities whether your address is on its list.
Other water systems serving parts of Cleveland
| Water system | Service lines | Total |
|---|---|---|
| Eastside Utility District | 0 lead · 57 galvanized · 6,178 unknown | 24,694 |
| Ocoee Utility District | 0 lead · 0 galvanized · 2,643 unknown | 7,661 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Cleveland drinking water violations
EPA records show no health-based violations for Cleveland Utilities since 2016.
Other water systems serving parts of Cleveland
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Eastside Utility District | None | 3 |
| Ocoee Utility District | None | 2 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Cleveland
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Candies Creek TDEC Division of Water Resources | River/Stream | 2 mi | 210 mg/L | 1 | 2010 |
| Little Chatata Creek TDEC Division of Water Resources | River/Stream | 2.7 mi | 240 mg/L | 1 | 2010 |
| Little Chatata Creek TDEC Division of Water Resources | River/Stream | 3 mi | 220 mg/L | 1 | 2010 |
| Little Chatata Creek TDEC Division of Water Resources | River/Stream | 3.7 mi | 260 mg/L | 1 | 2010 |
| CANDIES CK Tennessee Department of Environment and Conservation | River/Stream | 4 mi | 140 mg/L | 18 | 2007–2008 |
| Coahulla Creek TDEC Division of Water Resources | River/Stream | 4.1 mi | 200 mg/L | 4 | 2011–2012 |
Water hardness in towns near Cleveland
| Town | Distance | Median | Class |
|---|---|---|---|
| Collegedale | 13 mi | 141 mg/L | Hard |
| Soddy-Daisy | 18 mi | 44 mg/L | Soft |
| Middle Valley | 18 mi | 55 mg/L | Soft |
| Chattanooga | 23 mi | 84 mg/L | Moderately hard |
| East Ridge | 24 mi | 127 mg/L | Hard |
| Athens | 24 mi | 160 mg/L | Hard |
| Red Bank | 24 mi | 74 mg/L | Moderately hard |
| Crossville | 54 mi | 45 mg/L | Soft |
| Lenoir City | 55 mi | 147 mg/L | Hard |
| Farragut | 62 mi | 170 mg/L | Hard |
Bradley County
Cleveland is in Bradley County, where the median is 153 mg/L (hard) across 48 sites.
See all of Bradley County →Tennessee
The statewide median is 98 mg/L (moderately hard) from 3,359 sites.
Tennessee hardness map →Cleveland, TN water: common questions
Do I need a water softener in Cleveland?
Many homes here use one. Water measured around Cleveland is 9.1 gpg (156 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 16,000 grains.Size it for your household →
Who supplies Cleveland's drinking water?
The main public water system serving Cleveland in EPA records is Cleveland Utilities. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Cleveland?
It depends on what you want to remove. In Cleveland, EPA testing found PFBS, PFBA and PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 3 PFAS in Cleveland's main water system.
- How to tell if your home has a lead pipe15,476 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.