Water hardness in Tulsa, OK

Water in Tulsa is hard, with a median of 152 mg/L (8.9 grains per gallon) across Tulsa County.

34% softer than the Oklahoma median (231 mg/L) 35th hardest of 45 Oklahoma towns Population 411,894
152mg/L
8.9 grains per gallon
Hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Tulsa can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

There are not enough monitoring sites within 10 miles of Tulsa, so this page uses the Tulsa County median.

Tulsa tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 152 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.9 gpg (8.5 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites7
Lab samples235
Sample years2006–2025
Middle 50% of sites135–181 mg/L
Surface water (rivers, lakes)152 mg/L · 7 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Tulsa

Prefilled with Tulsa's measured local hardness of 152 mg/L (8.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Tulsa tap water

The City of Tulsa water system is the main public water system for Tulsa. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Jan 2023 – Oct 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Tulsa

Water systemPFAS detectedHighest PFOA / PFOSTested
Washington Co RWD #3 (New,#1)
serves over 10,000 people
None detected — Dec 2024 – Sep 2025
Sand Springs
serves over 10,000 people
None detected — Aug 2023 – May 2024
Broken Arrow Municipal Authority
serves over 10,000 people
PFOS, PFHxS, PFHxA +3 more ND / 51.3 ppt Feb 2023 – Dec 2023
Rogers Co RWD # 3 Lake Plant
serves over 10,000 people
None detected — Oct 2024 – Jul 2025
Wagoner Co. RWD #4
serves over 10,000 people
PFOS, PFHxS, PFPeA +2 more ND / 29.5 ppt Aug 2023 – May 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Tulsa

The City of Tulsa water system reported 162,343 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 128,216 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
128,216unknown material (79%)
34,127not lead (21%)

Other water systems serving parts of Tulsa

Water systemService linesTotal
Washington Co RWD #3 (New,#1)0 lead · 0 galvanized · 2,651 unknown11,862
Sand Springs0 lead · 134 galvanized · 11,918 unknown13,837
Broken Arrow Municipal Authority0 lead · 0 galvanized · 0 unknown41,154
Rogers Co RWD # 3 Lake PlantNot reported—
Wagoner Co. RWD #40 lead · 0 galvanized · 2,578 unknown13,907

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Tulsa drinking water violations

EPA records show no health-based violations for the City of Tulsa water system since 2016. It also had 23 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Tulsa

Water systemHealth-based violationsMonitoring/reporting
Washington Co RWD #3 (New,#1)None4
Sand SpringsNone6
Broken Arrow Municipal AuthorityNone0
Rogers Co RWD # 3 Lake Plant21 (1 open)24
Wagoner Co. RWD #4415

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Tulsa

SiteTypeDistanceMedianSamplesYears
Polecat Creek
Oklahoma Conservation Commission (State)
River/Stream 9.6 mi204 mg/L162008–2009
Polecat Creek
Oklahoma Conservation Commission (State)
River/Stream 9.6 mi210 mg/L152008–2009

Water hardness in towns near Tulsa

TownDistanceMedianClass
Broken Arrow9 mi 152 mg/LHard
Jenks10 mi 207 mg/LVery hard
Owasso12 mi 126 mg/LHard
Bixby13 mi 212 mg/LVery hard
Sand Springs13 mi 152 mg/LHard
Glenpool14 mi 207 mg/LVery hard
Sapulpa15 mi 207 mg/LVery hard
Coweta17 mi 112 mg/LModerately hard
Claremore21 mi 120 mg/LModerately hard
Okmulgee35 mi 152 mg/LHard

Tulsa County

Tulsa is in Tulsa County, where the median is 152 mg/L (hard) across 7 sites.

See all of Tulsa County →

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Tulsa, OK water: common questions

Do I need a water softener in Tulsa?

Many homes here use one. Water measured around Tulsa is 8.9 gpg (152 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 16,000 grains.Size it for your household →

Who supplies Tulsa's drinking water?

The main public water system serving Tulsa in EPA records is Tulsa. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Tulsa?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next