Water hardness in Logan County, OK

Water in Logan County is very hard, with a median of 350 mg/L (20.5 grains per gallon) across 30 monitoring sites.

52% harder than the Oklahoma median (231 mg/L) 27th hardest of 76 counties
350mg/L
20.5 grains per gallon
Very hard

Logan County water at a glance

  • HardnessVery hard (350 mg/L, 20.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 350 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 20.5 gpg (19.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites30
Lab samples423
Sample years2000–2024
Middle 50% of sites270–452 mg/L
Groundwater (wells, springs)243 mg/L · 7 sites
Surface water (rivers, lakes)384 mg/L · 23 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Logan County

Prefilled with Logan County's measured local hardness of 350 mg/L (20.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Logan County on the Oklahoma map

Harper CountyWashita CountyPottawatomie CountyLatimer CountyCimarron CountyNoble CountyCreek CountyDewey CountyGrady CountyAtoka CountyPushmataha CountyBlaine CountyCaddo CountyWoodward CountyMurray CountyGarfield CountyHarmon CountyMayes CountyGrant CountyCarter CountyJohnston CountyCleveland CountyLe Flore CountyPayne CountyAlfalfa CountyMajor CountyWoods CountyCraig CountySeminole CountyJackson CountyMcCurtain CountyNowata CountyComanche CountyLove CountyRogers CountyCuster CountyCanadian CountyBryan CountyEllis CountyAdair CountyOkmulgee CountyBeaver CountyMuskogee CountyOklahoma CountyCotton CountyJefferson CountyChoctaw CountyMarshall CountyPontotoc CountyWashington CountyBeckham CountyHaskell CountyOkfuskee CountyGreer CountyOttawa CountyDelaware CountyStephens CountyLincoln CountyMcClain CountyOsage CountyKay CountyHughes CountyWagoner CountyCherokee CountyRoger Mills CountyTulsa CountyTexas CountyPittsburg CountyGarvin CountyKingfisher CountySequoyah CountyPawnee CountyMcIntosh CountyKiowa CountyCoal CountyTillman County

Cities and communities in Logan County

PlaceMedian mg/LClassBased on
Guthrie 361 Very hard 13 sites within 10 miles
Langston 325 Very hard 10 sites within 10 miles
Crescent 362 Very hard 10 sites within 10 miles
Cashion 568 Very hard 7 sites within 10 miles
Cedar Valley 384 Very hard 16 sites within 10 miles
Coyle 334 Very hard 9 sites within 10 miles
Mulhall 447 Very hard 8 sites within 10 miles
Marshall 324 Very hard 10 sites within 10 miles
Cimarron City 400 Very hard 12 sites within 10 miles
Orlando 315 Very hard 5 sites within 10 miles
Meridian 290 Very hard 10 sites within 10 miles
Crescent Springs (CDP) 403 Very hard 11 sites within 10 miles
Lovell (CDP) 334 Very hard 11 sites within 10 miles
Seward (CDP) 288 Very hard 22 sites within 10 miles
Twin Lakes (CDP) 525 Very hard 8 sites within 10 miles

Water quality in Logan County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Guthrie Guthrie 4 found 0 lead · 3,651 unknown 3
Crescent Crescent Not tested 0 lead · 638 unknown 1
Cashion Cashion Not tested 0 lead · 328 unknown None
Coyle Coyle Not tested 0 lead · 180 unknown None
Mulhall Mulhall Not tested Not reported 1
Marshall Marshall Not tested 0 lead · 0 unknown None
Orlando Orlando Not tested 0 lead · 52 unknown None

Neighboring counties

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next