Water hardness in Garvin County, OK

Water in Garvin County is very hard, with a median of 406 mg/L (23.7 grains per gallon) across 18 monitoring sites.

76% harder than the Oklahoma median (231 mg/L) 23rd hardest of 76 counties
406mg/L
23.7 grains per gallon
Very hard

Garvin County water at a glance

  • HardnessVery hard (406 mg/L, 23.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 406 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 23.7 gpg (22.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites18
Lab samples385
Sample years2000–2025
Middle 50% of sites245–458 mg/L
Surface water (rivers, lakes)406 mg/L · 18 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Garvin County

Prefilled with Garvin County's measured local hardness of 406 mg/L (23.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Garvin County on the Oklahoma map

Harper CountyWashita CountyPottawatomie CountyLatimer CountyCimarron CountyNoble CountyCreek CountyDewey CountyGrady CountyAtoka CountyPushmataha CountyBlaine CountyCaddo CountyWoodward CountyMurray CountyGarfield CountyHarmon CountyMayes CountyGrant CountyCarter CountyJohnston CountyCleveland CountyLe Flore CountyPayne CountyAlfalfa CountyMajor CountyWoods CountyCraig CountySeminole CountyJackson CountyMcCurtain CountyNowata CountyComanche CountyLove CountyRogers CountyCuster CountyCanadian CountyBryan CountyEllis CountyAdair CountyOkmulgee CountyBeaver CountyMuskogee CountyOklahoma CountyCotton CountyJefferson CountyChoctaw CountyMarshall CountyPontotoc CountyWashington CountyBeckham CountyHaskell CountyOkfuskee CountyGreer CountyOttawa CountyDelaware CountyStephens CountyLincoln CountyMcClain CountyOsage CountyKay CountyHughes CountyWagoner CountyCherokee CountyRoger Mills CountyTulsa CountyTexas CountyPittsburg CountyKingfisher CountySequoyah CountyPawnee CountyMcIntosh CountyKiowa CountyLogan CountyCoal CountyTillman County

Cities and communities in Garvin County

PlaceMedian mg/LClassBased on
Pauls Valley 225 Very hard 11 sites within 10 miles
Lindsay 431 Very hard 9 sites within 10 miles
Wynnewood 264 Very hard 13 sites within 10 miles
Stratford 406 Very hard county median
Maysville 403 Very hard 11 sites within 10 miles
Elmore City 520 Very hard 6 sites within 10 miles
Paoli 410 Very hard 13 sites within 10 miles
Katie 398 Very hard 9 sites within 10 miles
Foster 459 Very hard 6 sites within 10 miles
Erin Springs 438 Very hard 6 sites within 10 miles
Hennepin (CDP) 370 Very hard 8 sites within 10 miles

Water quality in Garvin County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Pauls Valley Pauls Valley 1 found 15 lead · 2,581 unknown 6
Wynnewood Wynnewood Water & Light Not tested 0 lead · 1,007 unknown 12
Stratford Stratford Not tested 0 lead · 41 unknown 1
Maysville Maysville Not tested 0 lead · 603 unknown 147
Elmore City Elmore City Not tested 0 lead · 0 unknown None
Paoli Paoli Not tested Not reported 1

Neighboring counties

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next