Water hardness in Johnston County, OK

Water in Johnston County is very hard, with a median of 333 mg/L (19.5 grains per gallon) across 45 monitoring sites.

44% harder than the Oklahoma median (231 mg/L) 29th hardest of 76 counties
333mg/L
19.5 grains per gallon
Very hard

Johnston County water at a glance

  • HardnessVery hard (333 mg/L, 19.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 333 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 19.5 gpg (18.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites45
Lab samples560
Sample years2000–2025
Middle 50% of sites270–351 mg/L
Groundwater (wells, springs)348 mg/L · 25 sites
Surface water (rivers, lakes)258 mg/L · 20 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Johnston County

Prefilled with Johnston County's measured local hardness of 333 mg/L (19.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Johnston County on the Oklahoma map

Harper CountyWashita CountyPottawatomie CountyLatimer CountyCimarron CountyNoble CountyCreek CountyDewey CountyGrady CountyAtoka CountyPushmataha CountyBlaine CountyCaddo CountyWoodward CountyMurray CountyGarfield CountyHarmon CountyMayes CountyGrant CountyCarter CountyCleveland CountyLe Flore CountyPayne CountyAlfalfa CountyMajor CountyWoods CountyCraig CountySeminole CountyJackson CountyMcCurtain CountyNowata CountyComanche CountyLove CountyRogers CountyCuster CountyCanadian CountyBryan CountyEllis CountyAdair CountyOkmulgee CountyBeaver CountyMuskogee CountyOklahoma CountyCotton CountyJefferson CountyChoctaw CountyMarshall CountyPontotoc CountyWashington CountyBeckham CountyHaskell CountyOkfuskee CountyGreer CountyOttawa CountyDelaware CountyStephens CountyLincoln CountyMcClain CountyOsage CountyKay CountyHughes CountyWagoner CountyCherokee CountyRoger Mills CountyTulsa CountyTexas CountyPittsburg CountyGarvin CountyKingfisher CountySequoyah CountyPawnee CountyMcIntosh CountyKiowa CountyLogan CountyCoal CountyTillman County

Cities and communities in Johnston County

PlaceMedian mg/LClassBased on
Tishomingo 255 Very hard 9 sites within 10 miles
Mannsville 270 Very hard 7 sites within 10 miles
Ravia 256 Very hard 10 sites within 10 miles
Wapanucka 268 Very hard 7 sites within 10 miles
Mill Creek 343 Very hard 42 sites within 10 miles
Milburn 183 Very hard 8 sites within 10 miles
Bee (CDP) 180 Hard 9 sites within 10 miles
Bromide 338 Very hard 18 sites within 10 miles
Coleman (CDP) 222 Very hard 6 sites within 10 miles
Connerville (CDP) 344 Very hard 23 sites within 10 miles
Earl (CDP) 259 Very hard 9 sites within 10 miles
Emet (CDP) 183 Very hard 8 sites within 10 miles
Pontotoc (CDP) 344 Very hard 24 sites within 10 miles
Reagan (CDP) 336 Very hard 32 sites within 10 miles

Water quality in Johnston County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Tishomingo Tishomingo Municipal Authority Not tested 0 lead · 1,219 unknown 26
Mannsville Mannsville Public Works Authority Not tested 0 lead · 0 unknown None
Ravia Ravia Not tested 1 lead · 232 unknown 1
Wapanucka Wapanucka Not tested 0 lead · 207 unknown None
Mill Creek Mill Creek Not tested 0 lead · 0 unknown 1
Milburn Milburn Public Works Authority Not tested 0 lead · 0 unknown None
Bromide Bromide Not tested 0 lead · 0 unknown None

Neighboring counties

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next