Water hardness in Albany, NY
Water in Albany is hard, with a median of 148 mg/L (8.7 grains per gallon) across 28 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Albany can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Albany tap water at a glance
- HardnessHard (148 mg/L, 8.7 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 2,199 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 148 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.7 gpg (8.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Albany
Prefilled with Albany's measured local hardness of 148 mg/L (8.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Albany tap water
Albany City is the main public water system for Albany. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Sep 2023 – Jun 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Albany
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Bethlehem WD No 1 serves over 10,000 people | None detected | — | Jan 2023 – Nov 2023 |
| Latham Water District serves over 10,000 people | None detected | — | Jan 2023 – Oct 2023 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Albany
Albany City reported 24,680 service lines (the pipes connecting homes to the water main) in its inventory. 2,199 are lead and 46 are galvanized lines that must be replaced, and 19,108 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Albany City whether your address is on its list.
Other water systems serving parts of Albany
| Water system | Service lines | Total |
|---|---|---|
| Bethlehem WD No 1 | 2 lead · 128 galvanized · 5,327 unknown | 11,953 |
| Latham Water District | 6 lead · 34 galvanized · 2,922 unknown | 26,058 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Albany drinking water violations
EPA records show no health-based violations for Albany City since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Albany
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Bethlehem WD No 1 | 7 | 0 |
| Latham Water District | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Albany
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| NORMANSKILL CREEK New York State Dec Division Of Water (State) | River/Stream | 2.2 mi | 169 mg/L | 10 | 2008 |
| QA Samples New York State Dec Division Of Water (State) | Other-Surface Water | 2.7 mi | 11 mg/L | 98 | 2012 |
| PATROON CREEK AT ALBANY NY USGS New York Water Science Center | Stream | 2.7 mi | 298 mg/L | 9 | 2016 |
| HUDSON RIVER (Lower) In Glenmont NYS Dept. of EnCon, Division of Water | River/Stream | 5.2 mi | 83 mg/L | 23 | 2001–2004 |
| A1070 USGS New York Water Science Center | Well | 5.7 mi | 128 mg/L | 1 | 2006 |
| A 227 USGS New York Water Science Center | Well | 5.9 mi | 423 mg/L | 1 | 2013 |
Water hardness in towns near Albany
| Town | Distance | Median | Class |
|---|---|---|---|
| Watervliet | 6 mi | 123 mg/L | Hard |
| Troy | 8 mi | 123 mg/L | Hard |
| Cohoes | 9 mi | 164 mg/L | Hard |
| Rotterdam | 11 mi | 219 mg/L | Very hard |
| Schenectady | 11 mi | 207 mg/L | Very hard |
| Amsterdam | 28 mi | 301 mg/L | Very hard |
| Saratoga Springs | 28 mi | 114 mg/L | Moderately hard |
| Gloversville | 38 mi | 203 mg/L | Very hard |
| Glens Falls | 45 mi | 125 mg/L | Hard |
| Kingston | 52 mi | 152 mg/L | Hard |
Albany County
Albany is in Albany County, where the median is 194 mg/L (very hard) across 23 sites.
See all of Albany County →New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Albany, NY water: common questions
Do I need a water softener in Albany?
Many homes here use one. Water measured around Albany is 8.7 gpg (148 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →
Who supplies Albany's drinking water?
The main public water system serving Albany in EPA records is Albany City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Albany?
It depends on what you want to remove. In Albany, the system reports 2,199 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- How to tell if your home has a lead pipe2,199 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.