Water hardness in Kingston, NY

Water in Kingston is hard, with a median of 152 mg/L (8.8 grains per gallon) across 12 monitoring sites within 10 miles.

97% harder than the New York median (77 mg/L) 48th hardest of 193 New York towns Population 23,777
152mg/L
8.8 grains per gallon
Hard

Kingston tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 152 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.8 gpg (8.5 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites12
Lab samples36
Sample years2003–2020
Middle 50% of sites62–255 mg/L
Groundwater (wells, springs)215 mg/L · 9 sites
Surface water (rivers, lakes)83 mg/L · 3 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Kingston

Prefilled with Kingston's measured local hardness of 152 mg/L (8.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Kingston tap water

Kingston (City) Water District is the main public water system for Kingston. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jul 2024 – Apr 2025. 2 PFAS were detected. The highest PFOA and PFOS results were above EPA's drinking water limit (4 ppt).

ChemicalHighest resultDetected inEPA limit
PFOA
perfluorooctanoic acid
4.6 ppt 1 of 4 samples 4 ppt
PFOS
perfluorooctane sulfonic acid
4.3 ppt 1 of 4 samples 4 ppt

Other water systems serving parts of Kingston

Water systemPFAS detectedHighest PFOA / PFOSTested
Port Ewen Water District
serves 10,000 people or fewer
None detected — Mar 2024 – Oct 2024
Ulster Water District
serves 10,000 people or fewer
None detected — Feb 2024 – Nov 2024
Kingsvale Water
serves 10,000 people or fewer
None detected — Apr 2023 – Oct 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Kingston

Kingston (City) Water District reported 7,739 service lines (the pipes connecting homes to the water main) in its inventory. 2,711 are lead and 17 are galvanized lines that must be replaced, and 2,056 are still of unknown material.

2,711lead (35%)
17galvanized requiring replacement
2,056unknown material (27%)
2,955not lead (38%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Kingston (City) Water District whether your address is on its list.

Other water systems serving parts of Kingston

Water systemService linesTotal
Port Ewen Water District0 lead · 0 galvanized · 1,223 unknown1,498
Ulster Water District0 lead · 0 galvanized · 0 unknown1,816
Kingsvale Water0 lead · 0 galvanized · 120 unknown224

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Kingston drinking water violations

EPA records show no health-based violations for Kingston (City) Water District since 2016.

Other water systems serving parts of Kingston

Water systemHealth-based violationsMonitoring/reporting
Port Ewen Water District50
Ulster Water DistrictNone22
Kingsvale WaterNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Kingston

SiteTypeDistanceMedianSamplesYears
U1622
USGS New York Water Science Center
Well 3.4 mi215 mg/L32008–2018
DU1437
USGS New York Water Science Center
Well 7.4 mi245 mg/L12008
PLATTEKILL CREEK IN MT. MARION
NYS Dept. of EnCon, Division of Water
River/Stream 7.6 mi27 mg/L102003
U1901
USGS New York Water Science Center
Well 7.6 mi189 mg/L12006
U4172
USGS New York Water Science Center
Well 7.8 mi2 mg/L12008
BLACK CREEK ABOVE RT 9W BRIDGE AT ESOPUS NY
USGS New York Water Science Center
Stream 7.9 mi114 mg/L42016

Water hardness in towns near Kingston

TownDistanceMedianClass
Poughkeepsie17 mi 128 mg/LHard
Newburgh30 mi 132 mg/LHard
Beacon30 mi 132 mg/LHard
Middletown40 mi 34 mg/LSoft
Kiryas Joel42 mi 105 mg/LModerately hard
Woodbury42 mi 81 mg/LModerately hard
Jefferson Valley-Yorktown43 mi 91 mg/LModerately hard
Peekskill45 mi 73 mg/LModerately hard
Stony Point48 mi 77 mg/LModerately hard
West Haverstraw50 mi 53 mg/LSoft

Ulster County

Kingston is in Ulster County, where the median is 26 mg/L (soft) across 125 sites.

See all of Ulster County →

New York

The statewide median is 77 mg/L (moderately hard) from 2,847 sites.

New York hardness map →

Kingston, NY water: common questions

Do I need a water softener in Kingston?

Many homes here use one. Water measured around Kingston is 8.8 gpg (152 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 16,000 grains.Size it for your household →

Who supplies Kingston's drinking water?

The main public water system serving Kingston in EPA records is Kingston (City) Water District. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Kingston?

It depends on what you want to remove. In Kingston, EPA testing found PFOA and PFOS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 2,711 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next