Water hardness in Hobart, IN
Water in Hobart is very hard, with a median of 248 mg/L (14.5 grains per gallon) across 56 monitoring sites within 10 miles.
Hobart tap water at a glance
- HardnessVery hard (248 mg/L, 14.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 248 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.5 gpg (13.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Hobart
Prefilled with Hobart's measured local hardness of 248 mg/L (14.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Hobart tap water
Hobart is served by more than one water system. These systems supply ZIP codes in Hobart and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.
Water systems serving Hobart
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Indiana American Water - Northwest serves over 10,000 people | None detected | — | Jun 2023 – Mar 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Hobart
Hobart is served by more than one water system. Their service line inventories, as reported to EPA:
Water systems serving Hobart
| Water system | Service lines | Total |
|---|---|---|
| Indiana American Water - Northwest | 10,833 lead · 183 galvanized · 36,484 unknown | 91,302 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Hobart drinking water violations
Hobart is served by more than one water system. Health-based violations recorded by EPA since 2016:
Water systems serving Hobart
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Indiana American Water - Northwest | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Hobart
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| LMG030-0008 Indiana STORET | River/Stream | 1.8 mi | 287 mg/L | 7 | 2002–2004 |
| UMC030-0017 Indiana STORET | River/Stream | 4.7 mi | 361 mg/L | 1 | 2004 |
| LMG040-0001 Indiana STORET | River/Stream | 5.2 mi | 109 mg/L | 2 | 2000 |
| LMG030-0002 Indiana STORET | River/Stream | 5.9 mi | 110 mg/L | 1 | 2000 |
| LMG020-0001 Indiana STORET | River/Stream | 6.1 mi | 311 mg/L | 50 | 2000–2004 |
| LM-G Indiana STORET | Facility Public Water Supply (PWS) | 6.2 mi | 136 mg/L | 41 | 2000–2004 |
Water hardness in towns near Hobart
| Town | Distance | Median | Class |
|---|---|---|---|
| Merrillville | 4 mi | 316 mg/L | Very hard |
| Lake Station | 5 mi | 247 mg/L | Very hard |
| Gary | 6 mi | 236 mg/L | Very hard |
| Portage | 7 mi | 236 mg/L | Very hard |
| Griffith | 8 mi | 282 mg/L | Very hard |
| Crown Point | 8 mi | 366 mg/L | Very hard |
| Schererville | 9 mi | 260 mg/L | Very hard |
| Highland | 10 mi | 260 mg/L | Very hard |
| St. John | 11 mi | 360 mg/L | Very hard |
| Valparaiso | 12 mi | 391 mg/L | Very hard |
Lake County
Hobart is in Lake County, where the median is 250 mg/L (very hard) across 91 sites.
See all of Lake County →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.