Water hardness in Washington, IL
Water in Washington is very hard, with a median of 328 mg/L (19.2 grains per gallon) across 4 monitoring sites within 10 miles.
Washington tap water at a glance
- HardnessVery hard (328 mg/L, 19.2 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 328 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 19.2 gpg (18.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Washington
Prefilled with Washington's measured local hardness of 328 mg/L (19.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Washington tap water
The City of Washington water system is the main public water system for Washington. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2023 – Feb 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Washington
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| East Peoria serves over 10,000 people | PFBS, PFOS, PFHxS +1 more | ND / 4.2 ppt | Sep 2023 – Mar 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Washington
The City of Washington water system reported 5,536 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Washington
| Water system | Service lines | Total |
|---|---|---|
| East Peoria | 128 lead · 47 galvanized · 212 unknown | 8,245 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Washington drinking water violations
EPA records show no health-based violations for the City of Washington water system since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Washington
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| East Peoria | None | 4 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Washington
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Farm Creek illinois epa (State) | River/Stream | 2.5 mi | 284 mg/L | 2 | 2001 |
| Farm Creek illinois epa (State) | River/Stream | 5.3 mi | 370 mg/L | 3 | 2001 |
| Illinois River illinois epa (State) | River/Stream | 6.2 mi | 292 mg/L | 25 | 2000–2002 |
| Farm Creek illinois epa (State) | River/Stream | 8.1 mi | 364 mg/L | 20 | 2000–2002 |
Water hardness in towns near Washington
| Town | Distance | Median | Class |
|---|---|---|---|
| East Peoria | 6 mi | 367 mg/L | Very hard |
| Morton | 7 mi | 352 mg/L | Very hard |
| Peoria | 10 mi | 370 mg/L | Very hard |
| Pekin | 14 mi | 344 mg/L | Very hard |
| Normal | 27 mi | 386 mg/L | Very hard |
| Bloomington | 29 mi | 386 mg/L | Very hard |
| Canton | 33 mi | 320 mg/L | Very hard |
| Lincoln | 39 mi | 333 mg/L | Very hard |
| Streator | 43 mi | 320 mg/L | Very hard |
| Pontiac | 43 mi | 358 mg/L | Very hard |
Tazewell County
Washington is in Tazewell County, where the median is 340 mg/L (very hard) across 13 sites.
See all of Tazewell County →Washington, IL water: common questions
Do I need a water softener in Washington?
Very likely. Water measured around Washington is 19.2 gpg (328 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 34,000 grains.Size it for your household →
Who supplies Washington's drinking water?
The main public water system serving Washington in EPA records is Washington. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Washington?
Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.