Water hardness in Canton, IL
Water in Canton is very hard, with a median of 320 mg/L (18.7 grains per gallon) across 5 monitoring sites within 10 miles.
Canton tap water at a glance
- HardnessVery hard (320 mg/L, 18.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesThe water system reported 553 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 320 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 18.7 gpg (17.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Canton
Prefilled with Canton's measured local hardness of 320 mg/L (18.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Canton tap water
The City of Canton water system is the main public water system for Canton. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Sep 2024 – Jun 2025. 3 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 12 ppt | 4 of 4 samples | — |
| PFPeA perfluoropentanoic acid | 5.3 ppt | 4 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 4.8 ppt | 4 of 4 samples | — |
Other water systems serving parts of Canton
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Wee-Ma-Tuk Water District serves 10,000 people or fewer | PFBA, PFPeA, PFHxA | — | Feb 2024 – Nov 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Canton
The City of Canton water system reported 5,872 service lines (the pipes connecting homes to the water main) in its inventory. 553 are lead and 121 are galvanized lines that must be replaced, and 2,283 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Canton water system whether your address is on its list.
Other water systems serving parts of Canton
| Water system | Service lines | Total |
|---|---|---|
| Wee-Ma-Tuk Water District | 0 lead · 0 galvanized · 0 unknown | 332 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Canton drinking water violations
EPA records show no health-based violations for the City of Canton water system since 2016. It also had 7 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Canton
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Wee-Ma-Tuk Water District | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Canton
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| CANTON Illinois EPA | Lake | 3.4 mi | 196 mg/L | 4 | 2003 |
| Copperas Creek illinois epa (State) | River/Stream | 7.6 mi | 320 mg/L | 3 | 2001 |
| Slug Run illinois epa (State) | River/Stream | 8.4 mi | 891 mg/L | 26 | 2000–2002 |
| Big Creek illinois epa (State) | River/Stream | 8.9 mi | 524 mg/L | 26 | 2000–2002 |
| 8N 4E-11.1g1 USGS Illinois Water Science Center | Well | 9.6 mi | 136 mg/L | 2 | 2014–2017 |
Water hardness in towns near Canton
| Town | Distance | Median | Class |
|---|---|---|---|
| Pekin | 22 mi | 344 mg/L | Very hard |
| Peoria | 26 mi | 370 mg/L | Very hard |
| East Peoria | 27 mi | 367 mg/L | Very hard |
| Morton | 30 mi | 352 mg/L | Very hard |
| Galesburg | 32 mi | 314 mg/L | Very hard |
| Washington | 33 mi | 328 mg/L | Very hard |
| Macomb | 35 mi | 226 mg/L | Very hard |
| Lincoln | 45 mi | 333 mg/L | Very hard |
| Kewanee | 47 mi | 355 mg/L | Very hard |
| Normal | 55 mi | 386 mg/L | Very hard |
Fulton County
Canton is in Fulton County, where the median is 339 mg/L (very hard) across 13 sites.
See all of Fulton County →Canton, IL water: common questions
Do I need a water softener in Canton?
Very likely. Water measured around Canton is 18.7 gpg (320 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 33,000 grains.Size it for your household →
Who supplies Canton's drinking water?
The main public water system serving Canton in EPA records is Canton. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Canton?
It depends on what you want to remove. In Canton, EPA testing found PFBA, PFPeA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 553 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 3 PFAS in Canton's main water system.
- How to tell if your home has a lead pipe553 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.