Water hardness in Bellwood, IL
Water in Bellwood is very hard, with a median of 279 mg/L (16.3 grains per gallon) across 12 monitoring sites within 10 miles.
Bellwood tap water at a glance
- HardnessVery hard (279 mg/L, 16.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 1,257 lead service lines.Check your own pipe →
- Violations1 health-based violation since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 279 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 16.3 gpg (15.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Bellwood
Prefilled with Bellwood's measured local hardness of 279 mg/L (16.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Bellwood tap water
The City of Bellwood water system is the main public water system for Bellwood. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Oct 2024 – Feb 2026. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Bellwood
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Maywood serves over 10,000 people | None detected | — | Jun 2024 – Mar 2025 |
| Melrose Park serves over 10,000 people | None detected | — | Sep 2023 – Jun 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Bellwood
The City of Bellwood water system reported 2,892 service lines (the pipes connecting homes to the water main) in its inventory. 1,257 are lead and 0 are galvanized lines that must be replaced, and 930 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Bellwood water system whether your address is on its list.
Other water systems serving parts of Bellwood
| Water system | Service lines | Total |
|---|---|---|
| Maywood | 5,058 lead · 0 galvanized · 0 unknown | 6,328 |
| Melrose Park | 744 lead · 0 galvanized · 2,326 unknown | 5,056 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Bellwood drinking water violations
EPA records show 1 health-based violation for the City of Bellwood water system since 2016, all since resolved or closed. The most recent began in Oct 2024. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Lead and Copper Rule Revisions lead service line inventory and lead rule requirements | Treatment requirement not met | 1 | Oct 2024 | Resolved/closed |
Other water systems serving parts of Bellwood
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Maywood | 1 (1 open) | 8 |
| Melrose Park | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Bellwood
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Addison Creek illinois epa (State) | River/Stream | 0.4 mi | 306 mg/L | 24 | 2000–2002 |
| ADDISON CREEK AT BELLWOOD, IL USGS Illinois Water Science Center | Stream | 0.4 mi | 237 mg/L | 1 | 2000 |
| ADDISON CREEK AT 19TH AVENUE AT BROADVIEW, IL USGS Illinois Water Science Center | Stream | 2.5 mi | 298 mg/L | 1 | 2004 |
| SALT CREEK AT WESTERN SPRINGS, IL USGS Illinois Water Science Center | Stream | 4.2 mi | 277 mg/L | 27 | 2000–2001 |
| Salt Creek illinois epa (State) | River/Stream | 4.2 mi | 289 mg/L | 25 | 2000–2002 |
| Des Plaines River illinois epa (State) | River/Stream | 5 mi | 286 mg/L | 24 | 2000–2002 |
Water hardness in towns near Bellwood
| Town | Distance | Median | Class |
|---|---|---|---|
| Melrose Park | 2 mi | 277 mg/L | Very hard |
| Maywood | 2 mi | 286 mg/L | Very hard |
| Westchester | 2 mi | 277 mg/L | Very hard |
| Northlake | 3 mi | 279 mg/L | Very hard |
| River Forest | 3 mi | 286 mg/L | Very hard |
| Forest Park | 3 mi | 283 mg/L | Very hard |
| River Grove | 3 mi | 276 mg/L | Very hard |
| La Grange Park | 4 mi | 277 mg/L | Very hard |
| Elmhurst | 4 mi | 282 mg/L | Very hard |
| Franklin Park | 4 mi | 276 mg/L | Very hard |
Cook County
Bellwood is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.
See all of Cook County →Bellwood, IL water: common questions
Do I need a water softener in Bellwood?
Very likely. Water measured around Bellwood is 16.3 gpg (279 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →
Who supplies Bellwood's drinking water?
The main public water system serving Bellwood in EPA records is Bellwood. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Bellwood?
It depends on what you want to remove. In Bellwood, the system reports 1,257 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Lead and Copper Rule Revisions; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe1,257 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.