Water hardness in Arlington Heights, IL

Water in Arlington Heights is very hard, with a median of 269 mg/L (15.7 grains per gallon) across 9 monitoring sites within 10 miles.

8% softer than the Illinois median (293 mg/L) 142nd hardest of 225 Illinois towns Population 74,495
269mg/L
15.7 grains per gallon
Very hard

Arlington Heights tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 269 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 15.7 gpg (15.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites9
Lab samples56
Sample years2000–2017
Middle 50% of sites238–298 mg/L
Groundwater (wells, springs)252 mg/L · 3 sites
Surface water (rivers, lakes)270 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Arlington Heights

Prefilled with Arlington Heights's measured local hardness of 269 mg/L (15.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Arlington Heights tap water

The City of Arlington Heights water system is the main public water system for Arlington Heights. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Dec 2023 – Sep 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Arlington Heights

Water systemPFAS detectedHighest PFOA / PFOSTested
IL American-Chicago Suburban
serves over 10,000 people
None detected — Nov 2023 – Aug 2024
Mount Prospect
serves over 10,000 people
None detected — Nov 2023 – Aug 2024
ELK Grove Village
serves over 10,000 people
None detected — Nov 2024 – Aug 2025
Wheeling
serves over 10,000 people
None detected — Nov 2023 – Aug 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Arlington Heights

The City of Arlington Heights water system reported 20,303 service lines (the pipes connecting homes to the water main) in its inventory. 3,677 are lead and 1 are galvanized lines that must be replaced, and 80 are still of unknown material.

3,677lead (18%)
1galvanized requiring replacement
80unknown material (<1%)
16,545not lead (81%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Arlington Heights water system whether your address is on its list.

Other water systems serving parts of Arlington Heights

Water systemService linesTotal
IL American-Chicago Suburban0 lead · 0 galvanized · 0 unknown4,487
Mount Prospect700 lead · 27 galvanized · 65 unknown11,654
ELK Grove Village0 lead · 0 galvanized · 0 unknown12,301
Wheeling0 lead · 0 galvanized · 0 unknown8,181

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Arlington Heights drinking water violations

EPA records show no health-based violations for the City of Arlington Heights water system since 2016. It also had 25 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Arlington Heights

Water systemHealth-based violationsMonitoring/reporting
IL American-Chicago SuburbanNone0
Mount ProspectNone14
ELK Grove VillageNone5
Wheeling11

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Arlington Heights

SiteTypeDistanceMedianSamplesYears
42N11E-30.3b2
USGS Illinois Water Science Center
Well 1.1 mi597 mg/L12014
42N10E-25.6b1
USGS Illinois Water Science Center
Well 2.1 mi252 mg/L12014
Des Plaines River
illinois epa (State)
River/Stream 5.3 mi312 mg/L232000–2002
SALT CREEK AT ELK GROVE VILLAGE, IL
USGS Illinois Water Science Center
Stream 6 mi201 mg/L12000
West Fork North Branch Chicago River
illinois epa (State)
River/Stream 8 mi269 mg/L22001
43N10E-16.4d1
USGS Illinois Water Science Center
Well 8.7 mi238 mg/L22007–2017

Water hardness in towns near Arlington Heights

TownDistanceMedianClass
Rolling Meadows3 mi 252 mg/LVery hard
Prospect Heights3 mi 255 mg/LVery hard
Mount Prospect3 mi 262 mg/LVery hard
Palatine3 mi 277 mg/LVery hard
Wheeling4 mi 238 mg/LVery hard
Buffalo Grove5 mi 252 mg/LVery hard
Des Plaines6 mi 255 mg/LVery hard
Elk Grove Village6 mi 278 mg/LVery hard
Schaumburg7 mi 308 mg/LVery hard
Northbrook8 mi 244 mg/LVery hard

Cook County

Arlington Heights is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.

See all of Cook County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Arlington Heights, IL water: common questions

Do I need a water softener in Arlington Heights?

Very likely. Water measured around Arlington Heights is 15.7 gpg (269 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 28,000 grains.Size it for your household →

Who supplies Arlington Heights's drinking water?

The main public water system serving Arlington Heights in EPA records is Arlington Heights. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Arlington Heights?

It depends on what you want to remove. In Arlington Heights, the system reports 3,677 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next