Water hardness in Prospect Heights, IL

Water in Prospect Heights is very hard, with a median of 255 mg/L (14.9 grains per gallon) across 13 monitoring sites within 10 miles.

13% softer than the Illinois median (293 mg/L) 156th hardest of 225 Illinois towns Population 15,334
255mg/L
14.9 grains per gallon
Very hard

Prospect Heights tap water at a glance

  • HardnessVery hard (255 mg/L, 14.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 255 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 14.9 gpg (14.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites13
Lab samples86
Sample years2000–2014
Middle 50% of sites231–280 mg/L
Groundwater (wells, springs)424 mg/L · 2 sites
Surface water (rivers, lakes)255 mg/L · 11 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Prospect Heights

Prefilled with Prospect Heights's measured local hardness of 255 mg/L (14.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Prospect Heights tap water

Prospect Heights is served by more than one water system. These systems supply ZIP codes in Prospect Heights and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.

Water systems serving Prospect Heights

Water systemPFAS detectedHighest PFOA / PFOSTested
IL American-Chicago Suburban
serves over 10,000 people
None detected — Nov 2023 – Aug 2024
Mount Prospect
serves over 10,000 people
None detected — Nov 2023 – Aug 2024
Northbrook
serves over 10,000 people
None detected — Aug 2023 – May 2024
Arlington Heights
serves over 10,000 people
None detected — Dec 2023 – Sep 2024
Wheeling
serves over 10,000 people
None detected — Nov 2023 – Aug 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Prospect Heights

Prospect Heights is served by more than one water system. Their service line inventories, as reported to EPA:

Water systems serving Prospect Heights

Water systemService linesTotal
IL American-Chicago Suburban0 lead · 0 galvanized · 0 unknown4,487
Mount Prospect700 lead · 27 galvanized · 65 unknown11,654
Northbrook313 lead · 1 galvanized · 0 unknown12,509
Arlington Heights3,677 lead · 1 galvanized · 80 unknown20,303
Wheeling0 lead · 0 galvanized · 0 unknown8,181

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Prospect Heights drinking water violations

Prospect Heights is served by more than one water system. Health-based violations recorded by EPA since 2016:

Water systems serving Prospect Heights

Water systemHealth-based violationsMonitoring/reporting
IL American-Chicago SuburbanNone0
Mount ProspectNone14
NorthbrookNone4
Arlington HeightsNone25
Wheeling11

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Prospect Heights

SiteTypeDistanceMedianSamplesYears
Des Plaines River
illinois epa (State)
River/Stream 3.4 mi312 mg/L232000–2002
42N11E-30.3b2
USGS Illinois Water Science Center
Well 3.5 mi597 mg/L12014
42N10E-25.6b1
USGS Illinois Water Science Center
Well 4.8 mi252 mg/L12014
West Fork North Branch Chicago River
illinois epa (State)
River/Stream 5.4 mi269 mg/L22001
Middle Fork North Branch Chicago River
illinois epa (State)
River/Stream 6.6 mi298 mg/L242000–2002
N BR CHICAGO R AT DEERFIELD RD AT DEERFIELD, IL
USGS Illinois Water Science Center
Stream 6.8 mi222 mg/L12000

Water hardness in towns near Prospect Heights

TownDistanceMedianClass
Wheeling2 mi 238 mg/LVery hard
Arlington Heights3 mi 269 mg/LVery hard
Mount Prospect3 mi 262 mg/LVery hard
Buffalo Grove5 mi 252 mg/LVery hard
Des Plaines5 mi 255 mg/LVery hard
Northbrook5 mi 244 mg/LVery hard
Rolling Meadows5 mi 252 mg/LVery hard
Glenview5 mi 244 mg/LVery hard
Deerfield6 mi 231 mg/LVery hard
Palatine6 mi 277 mg/LVery hard

Cook County

Prospect Heights is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.

See all of Cook County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next