Water hardness in Searcy County, AR
Water in Searcy County is hard, with a median of 138 mg/L (8 grains per gallon) across 34 monitoring sites.
Searcy County water at a glance
- HardnessHard (138 mg/L, 8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 138 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8 gpg (7.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Searcy County
Prefilled with Searcy County's measured local hardness of 138 mg/L (8.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Searcy County on the Arkansas map
Cities and communities in Searcy County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Marshall | 154 | Hard | 23 sites within 10 miles |
| Leslie | 140 | Hard | 21 sites within 10 miles |
| St. Joe | 169 | Hard | 23 sites within 10 miles |
| Pindall | 136 | Hard | 15 sites within 10 miles |
| Big Flat | 155 | Hard | 11 sites within 10 miles |
| Gilbert | 168 | Hard | 24 sites within 10 miles |
| Witts Springs (CDP) | 12 | Soft | 11 sites within 10 miles |
Water quality in Searcy County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Marshall | Marshall Waterworks | Not tested | 0 lead · 1,118 unknown | None |
| Leslie | Leslie Water System | Not tested | 0 lead · 375 unknown | None |
| Big Flat | Big Flat Waterworks | Not tested | Not reported | 1 (1 open) |
Neighboring counties
- Van Buren County33 mg/L
- Marion County174 mg/L
- Newton County91 mg/L
- Stone County137 mg/L
- Baxter County220 mg/L
- Boone County192 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.