Water hardness in Cross County, AR
Water in Cross County is hard, with a median of 126 mg/L (7.3 grains per gallon) across 15 monitoring sites.
Cross County water at a glance
- HardnessHard (126 mg/L, 7.3 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 126 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.3 gpg (7.1 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Cross County
Prefilled with Cross County's measured local hardness of 126 mg/L (7.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Cross County on the Arkansas map
Cities and communities in Cross County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Wynne | 74 | Moderately hard | 9 sites within 10 miles |
| Parkin | 89 | Moderately hard | 3 sites within 10 miles |
| Cherry Valley | 94 | Moderately hard | 5 sites within 10 miles |
| Hickory Ridge | 193 | Very hard | 4 sites within 10 miles |
| Fair Oaks (CDP) | 82 | Moderately hard | 4 sites within 10 miles |
| Vanndale (CDP) | 184 | Very hard | 7 sites within 10 miles |
Water quality in Cross County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Wynne | Wynne Waterworks | None detected | 0 lead · 2,646 unknown | None |
| Parkin | Parkin Waterworks | Not tested | 0 lead · 336 unknown | 2 |
| Cherry Valley | Cherry Valley Waterworks | Not tested | 0 lead · 0 unknown | None |
| Hickory Ridge | Hickory Ridge Waterworks | Not tested | 0 lead · 193 unknown | 1 |
Neighboring counties
- St. Francis County95 mg/L
- Poinsett County147 mg/L
- Crittenden County92 mg/L
- Woodruff County101 mg/L
- Jackson County132 mg/L
- Lee County104 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.