Water hardness in Prairie County, AR

Water in Prairie County is hard, with a median of 129 mg/L (7.5 grains per gallon) across 15 monitoring sites.

119% harder than the Arkansas median (59 mg/L) 17th hardest of 75 counties
129mg/L
7.5 grains per gallon
Hard

Prairie County water at a glance

  • HardnessHard (129 mg/L, 7.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 129 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.5 gpg (7.2 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites15
Lab samples479
Sample years2000–2026
Middle 50% of sites69–346 mg/L
Groundwater (wells, springs)409 mg/L · 7 sites
Surface water (rivers, lakes)69 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Prairie County

Prefilled with Prairie County's measured local hardness of 129 mg/L (7.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Prairie County on the Arkansas map

Montgomery CountyJohnson CountyCraighead CountyGrant CountySt. Francis CountyCross CountyFranklin CountyNevada CountyPoinsett CountySearcy CountyCleburne CountyJefferson CountyNewton CountyVan Buren CountyLincoln CountyBoone CountyBradley CountyRandolph CountyDrew CountyConway CountyDallas CountyArkansas CountyHoward CountyLafayette CountyLogan CountyCleveland CountyUnion CountyGarland CountyMonroe CountyClark CountyFulton CountyLittle River CountyFaulkner CountyColumbia CountyWoodruff CountyMississippi CountyWashington CountyJackson CountyLonoke CountyPike CountyCalhoun CountyScott CountySebastian CountySharp CountyLee CountyPhillips CountyYell CountyPope CountyOuachita CountyBenton CountySevier CountyCrawford CountyHempstead CountyMadison CountyBaxter CountyStone CountyClay CountyGreene CountyIndependence CountyWhite CountyMarion CountyHot Spring CountyIzard CountyDesha CountyPulaski CountyLawrence CountyCarroll CountyCrittenden CountyPerry CountyMiller CountySaline CountyChicot CountyAshley CountyPolk County

Cities and communities in Prairie County

PlaceMedian mg/LClassBased on
Des Arc 42 Soft 4 sites within 10 miles
Hazen 253 Very hard 9 sites within 10 miles
De Valls Bluff 170 Hard 9 sites within 10 miles
Fredonia (Biscoe) 288 Very hard 15 sites within 10 miles
Ulm 286 Very hard 6 sites within 10 miles

Water quality in Prairie County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Des Arc Des ARC Waterworks None detected 0 lead · 1,761 unknown 8
Hazen Hazen Waterworks Not tested 0 lead · 704 unknown None
Ulm ULM Waterworks Not tested 0 lead · 113 unknown 5 (4 open)

Neighboring counties

Arkansas

The statewide median is 59 mg/L (soft) from 1,916 sites.

Arkansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next