Water hardness in North Okanagan Region, BC
Water in North Okanagan Region is soft, with a median of 50 mg/L (2.9 grains per gallon) across 1 monitoring site.
North Okanagan Region water at a glance
- HardnessSoft (50 mg/L, 2.9 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 50 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 2.9 gpg (2.8 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Environment and Climate Change Canada and the Government of Ontario. Utilities that soften or blend water may deliver different numbers, so check your utility's annual drinking water quality report for exact tap values. Methodology
Water softener and dishwasher calculator for North Okanagan Region
Prefilled with North Okanagan Region's measured local hardness of 50 mg/L (2.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Water use defaults to the Canadian average of 223 litres per person per day (Statistics Canada, 2021); softeners are rated in grains of hardness removed. Sodium uses about 8 mg/L added per grain per gallon removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
North Okanagan Region on the British Columbia map
Cities and communities in North Okanagan Region
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Vernon | 50 | Soft | region median |
| Coldstream | 50 | Soft | region median |
| Armstrong | 50 | Soft | region median |
| Spallumcheen | 50 | Soft | region median |
| North Okanagan C | 50 | Soft | region median |
| North Okanagan F | 50 | Soft | region median |
| North Okanagan B | 50 | Soft | region median |
| Okanagan (Part) 1 (Indian Reserve) | 50 | Soft | region median |
| Enderby | 123 | Hard | 2 sites within 25 km |
| North Okanagan D | 50 | Soft | region median |
| Lumby | 50 | Soft | region median |
| North Okanagan E | 50 | Soft | region median |
| Enderby 2 | 123 | Hard | 2 sites within 25 km |
| Priest's Valley 6 | 50 | Soft | region median |
| Harris 3 | 50 | Soft | region median |
Neighboring regions
- Central Okanagan Region81 mg/L
- Kootenay Boundary Region68 mg/L
- Central Kootenay Region108 mg/L
- Columbia-Shuswap Region104 mg/L
- Okanagan-Similkameen Region78 mg/L
- Thompson-Nicola Region45 mg/L
British Columbia
The statewide median is 65 mg/L (moderately hard) from 54 sites.
British Columbia hardness map →Hardness scale
What to read next
- Lead in drinking water in CanadaHealth Canada's 5 µg/L guideline and how to check for lead pipes.
- Canadian drinking water guidelinesHealth Canada's limits for lead, nitrate, PFAS and more, vs the US.
- Well water testing in CanadaHow often to test a private well and for what, per Health Canada.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.