Water hardness in Plover, WI

Water in Plover is hard, with a median of 150 mg/L (8.8 grains per gallon) across 7 monitoring sites within 10 miles.

about the same as the Wisconsin median (148 mg/L) 82nd hardest of 97 Wisconsin towns Population 14,110
150mg/L
8.8 grains per gallon
Hard

Plover tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 150 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.8 gpg (8.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites7
Lab samples26
Sample years2000–2026
Middle 50% of sites84–212 mg/L
Groundwater (wells, springs)425 mg/L · 1 sites
Surface water (rivers, lakes)129 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Plover

Prefilled with Plover's measured local hardness of 150 mg/L (8.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Plover tap water

Plover Waterworks is the main public water system for Plover. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 6 samples taken Sep 2023 – Mar 2024. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
7.5 ppt 2 of 6 samples —

Other water systems serving parts of Plover

Water systemPFAS detectedHighest PFOA / PFOSTested
Stevens Point Waterworks
serves over 10,000 people
None detected — Nov 2023 – May 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Plover

Plover Waterworks reported 5,032 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
5,032not lead (100%)

Other water systems serving parts of Plover

Water systemService linesTotal
Stevens Point Waterworks0 lead · 0 galvanized · 95 unknown5,758

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Plover drinking water violations

EPA records show 1 health-based violation for Plover Waterworks since 2016, all since resolved or closed. The most recent began in Jan 2019.

Contaminant or ruleTypeViolationsMost recentStatus
Groundwater Rule
requirements to protect well water from fecal contamination
Treatment requirement not met 1 Jan 2019 Resolved/closed

Other water systems serving parts of Plover

Water systemHealth-based violationsMonitoring/reporting
Stevens Point WaterworksNone2

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Plover

SiteTypeDistanceMedianSamplesYears
Mcdill Pond - Deep Hole
Wisconsin Department of Natural Resources
Lake 2.5 mi190 mg/L12000
Wisconsin River at Stevens Point Dam
Wisconsin Department of Natural Resources
River/Stream 4.5 mi44 mg/L122000–2001
Joanis Lake - Center
Wisconsin Department of Natural Resources
Lake 5.2 mi59 mg/L52024–2026
Mill Creek at Cth P
Wisconsin Department of Natural Resources
River/Stream 5.7 mi150 mg/L22000–2001
Unnamed (Eagle Pointe) Lake - Center of Lake
Wisconsin Department of Natural Resources
Lake 6.3 mi108 mg/L12025
PT-23/09E/26-1321
USGS Wisconsin Water Science Center
Well 8.2 mi425 mg/L32002–2023

Water hardness in towns near Plover

TownDistanceMedianClass
Stevens Point4 mi 275 mg/LVery hard
Wisconsin Rapids15 mi 140 mg/LHard
Weston30 mi 46 mg/LSoft
Marshfield34 mi 209 mg/LVery hard
Wausau35 mi 51 mg/LSoft
Greenville50 mi 302 mg/LVery hard
Fox Crossing55 mi 180 mg/LHard
Neenah56 mi 274 mg/LVery hard
Oshkosh57 mi 222 mg/LVery hard
Menasha58 mi 180 mg/LHard

Portage County

Plover is in Portage County, where the median is 267 mg/L (very hard) across 70 sites.

See all of Portage County →

Wisconsin

The statewide median is 148 mg/L (hard) from 1,102 sites.

Wisconsin hardness map →

Plover, WI water: common questions

Do I need a water softener in Plover?

Many homes here use one. Water measured around Plover is 8.8 gpg (150 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 16,000 grains.Size it for your household →

Who supplies Plover's drinking water?

The main public water system serving Plover in EPA records is Plover Waterworks. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Plover?

It depends on what you want to remove. In Plover, EPA testing found PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for the Groundwater Rule; the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next