Water hardness in Greenville, WI

Water in Greenville is very hard, with a median of 302 mg/L (17.6 grains per gallon) across 3 monitoring sites within 10 miles.

104% harder than the Wisconsin median (148 mg/L) 34th hardest of 97 Wisconsin towns Population 13,286
302mg/L
17.6 grains per gallon
Very hard

Greenville tap water at a glance

  • HardnessVery hard (302 mg/L, 17.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 302 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.6 gpg (16.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites3
Lab samples8
Sample years2002–2015
Middle 50% of sites300–352 mg/L
Groundwater (wells, springs)302 mg/L · 1 sites
Surface water (rivers, lakes)350 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Greenville

Prefilled with Greenville's measured local hardness of 302 mg/L (17.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Monitoring sites closest to Greenville

SiteTypeDistanceMedianSamplesYears
OU-21/15E/01-0629
USGS Wisconsin Water Science Center
Well 5 mi302 mg/L62002–2015
BLACK OTTER LAKE - DEEP HOLE
Wisconsin Department of Natural Resources
Lake 5.4 mi298 mg/L12002
Arrowhead River - S of Oakridge (Lakeview) Road
Wisconsin Department of Natural Resources
River/Stream 9.4 mi402 mg/L12007

Water hardness in towns near Greenville

TownDistanceMedianClass
Fox Crossing5 mi 180 mg/LHard
Menasha8 mi 180 mg/LHard
Appleton8 mi 180 mg/LHard
Neenah9 mi 274 mg/LVery hard
Little Chute11 mi 310 mg/LVery hard
Kaukauna14 mi 310 mg/LVery hard
Harrison14 mi 370 mg/LVery hard
Oshkosh18 mi 222 mg/LVery hard
Hobart24 mi 188 mg/LVery hard
De Pere25 mi 225 mg/LVery hard

Outagamie County

Greenville is in Outagamie County, where the median is 276 mg/L (very hard) across 8 sites.

See all of Outagamie County →

Wisconsin

The statewide median is 148 mg/L (hard) from 1,102 sites.

Wisconsin hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next