Water hardness in Tyler County, WV
Water in Tyler County is very hard, with a median of 184 mg/L (10.7 grains per gallon) across 3 monitoring sites.
Tyler County water at a glance
- HardnessVery hard (184 mg/L, 10.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 184 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 10.7 gpg (10.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Tyler County
Prefilled with Tyler County's measured local hardness of 184 mg/L (10.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Tyler County on the West Virginia map
Cities and communities in Tyler County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Paden City | 129 | Hard | 4 sites within 10 miles |
| Sistersville | 184 | Very hard | county median |
| Middlebourne | 168 | Hard | 4 sites within 10 miles |
| Friendly | 184 | Very hard | county median |
Water quality in Tyler County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Paden City | City of Paden City | Not tested | 0 lead · 0 unknown | 32 (17 open) |
| Sistersville | Sistersville Municipal Water | Not tested | 1 lead · 0 unknown | 8 (1 open) |
| Middlebourne | Middlebourne Water Works | Not tested | 0 lead · 0 unknown | 10 (1 open) |
| Friendly | Tyler County PSD | Not tested | 0 lead · 0 unknown | 2 |
Neighboring counties
- Wetzel County111 mg/L
- Doddridge County165 mg/L
- Pleasants County102 mg/L
- Ritchie County102 mg/L
- Marshall County101 mg/L
- Harrison County250 mg/L
West Virginia
The statewide median is 107 mg/L (moderately hard) from 416 sites.
West Virginia hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.