Water hardness in Seagoville, TX
Water in Seagoville is hard, with a median of 167 mg/L (9.8 grains per gallon) across 3 monitoring sites within 10 miles.
Seagoville tap water at a glance
- HardnessHard (167 mg/L, 9.8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS5 found; the highest PFOS result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesNo known lead lines; 5,530 lines are still of unknown material.Check your own pipe →
- Violations1 health-based violation since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 167 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 9.8 gpg (9.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Seagoville
Prefilled with Seagoville's measured local hardness of 167 mg/L (9.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Seagoville tap water
City of Seagoville is the main public water system for Seagoville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Apr 2023 – Jun 2024. 5 PFAS were detected. The highest PFOS result was above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 12.1 ppt | 4 of 4 samples | — |
| PFPeA perfluoropentanoic acid | 6.3 ppt | 4 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 6.1 ppt | 4 of 4 samples | — |
| PFBS perfluorobutane sulfonic acid | 5.1 ppt | 4 of 4 samples | — |
| PFOS perfluorooctane sulfonic acid | 5.1 ppt | 1 of 4 samples | 4 ppt |
Other water systems serving parts of Seagoville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Dallas Water Utility serves over 10,000 people | PFPeA, PFHxA, PFBA +5 more | 6.3 / 5.1 ppt | Mar 2023 – Jan 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Seagoville
City of Seagoville reported 5,530 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 5,530 lines are still of unknown material.
Other water systems serving parts of Seagoville
| Water system | Service lines | Total |
|---|---|---|
| Dallas Water Utility | 0 lead · 6 galvanized · 258,104 unknown | 320,491 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Seagoville drinking water violations
EPA records show 1 health-based violation for City of Seagoville since 2016, all since resolved or closed. The most recent began in Oct 2024. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Lead and Copper Rule Revisions lead service line inventory and lead rule requirements | Treatment requirement not met | 1 | Oct 2024 | Resolved/closed |
Other water systems serving parts of Seagoville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Dallas Water Utility | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Seagoville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| E Fk Trinity Rv nr Crandall, TX USGS Texas Water Science Center | Stream | 3.6 mi | 167 mg/L | 6 | 2000 |
| E FK TRINITY RIVER AT FM 3039 Texas Commission on Environmental Quality | River/Stream | 5.1 mi | 165 mg/L | 16 | 2004–2005 |
| Trinity Rv nr Wilmer, TX USGS Texas Water Science Center | Stream | 5.1 mi | 171 mg/L | 21 | 2000–2001 |
Water hardness in towns near Seagoville
| Town | Distance | Median | Class |
|---|---|---|---|
| Balch Springs | 6 mi | 164 mg/L | Hard |
| Mesquite | 8 mi | 118 mg/L | Moderately hard |
| Forney | 8 mi | 118 mg/L | Moderately hard |
| Lancaster | 14 mi | 171 mg/L | Hard |
| Heath | 15 mi | 118 mg/L | Moderately hard |
| Terrell | 16 mi | 166 mg/L | Hard |
| Dallas | 16 mi | 138 mg/L | Hard |
| Red Oak | 17 mi | 125 mg/L | Hard |
| Rowlett | 18 mi | 118 mg/L | Moderately hard |
| Garland | 18 mi | 118 mg/L | Moderately hard |
Kaufman County
Seagoville is in Kaufman County, where the median is 166 mg/L (hard) across 4 sites.
See all of Kaufman County →Seagoville, TX water: common questions
Do I need a water softener in Seagoville?
Many homes here use one. Water measured around Seagoville is 9.8 gpg (167 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 17,000 grains.Size it for your household →
Who supplies Seagoville's drinking water?
The main public water system serving Seagoville in EPA records is City of Seagoville. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Seagoville?
It depends on what you want to remove. In Seagoville, EPA testing found PFBA, PFPeA and PFHxA and 2 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for the Lead and Copper Rule Revisions; the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 5 PFAS in Seagoville's main water system.
- How to tell if your home has a lead pipe5,530 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.