Water hardness in Murphy, TX
Water in Murphy is hard, with a median of 124 mg/L (7.2 grains per gallon) across 7 monitoring sites within 10 miles.
Murphy tap water at a glance
- HardnessHard (124 mg/L, 7.2 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS4 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 124 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.2 gpg (6.9 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Murphy
Prefilled with Murphy's measured local hardness of 124 mg/L (7.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Murphy tap water
City of Murphy is the main public water system for Murphy. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2024 – May 2025. 4 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 7.8 ppt | 3 of 4 samples | — |
| PFPeA perfluoropentanoic acid | 5.9 ppt | 4 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 5.6 ppt | 4 of 4 samples | — |
| PFBS perfluorobutane sulfonic acid | 4.4 ppt | 3 of 4 samples | — |
Other water systems serving parts of Murphy
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| City of Plano serves over 10,000 people | PFBA, PFHxA, PFPeA +1 more | — | Feb 2025 – Nov 2025 |
| City of Richardson serves over 10,000 people | PFBA, PFPeA, PFHxA +1 more | — | Feb 2024 – Jan 2025 |
| City of Sachse serves over 10,000 people | PFBA, PFPeA, PFHxA +1 more | — | Jun 2024 – Jul 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Murphy
City of Murphy reported 6,470 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Murphy
| Water system | Service lines | Total |
|---|---|---|
| City of Plano | 0 lead · 1 galvanized · 0 unknown | 83,917 |
| City of Richardson | 0 lead · 0 galvanized · 11,135 unknown | 35,148 |
| City of Sachse | 0 lead · 0 galvanized · 0 unknown | 9,636 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Murphy drinking water violations
EPA records show no health-based violations for City of Murphy since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Murphy
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| City of Plano | None | 0 |
| City of Richardson | None | 1 |
| City of Sachse | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Murphy
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| ROWLETT CREEK AT SH 78 Texas Commission on Environmental Quality | River/Stream | 3.9 mi | 212 mg/L | 24 | 2000–2003 |
| Lavon Lk at Raw Water Intake #2 USGS Texas Water Science Center | Lake, Reservoir, Impoundment | 6.2 mi | 114 mg/L | 60 | 2011–2023 |
| Lavon Lk nr East Fork Trinity River USGS Texas Water Science Center | Lake, Reservoir, Impoundment | 7 mi | 112 mg/L | 50 | 2011–2020 |
| MUDDY CREEK AT LIBERTY GROVE R Texas Commission on Environmental Quality | River/Stream | 7 mi | 168 mg/L | 30 | 2000–2003 |
| Lk Ray Hubbard nr Cottonwood Ck nr Rockwall, TX USGS Texas Water Science Center | Lake, Reservoir, Impoundment | 7.8 mi | 124 mg/L | 140 | 2016–2023 |
| LAKE RAY HUBBARD AT US 66 Texas Commission on Environmental Quality | Reservoir | 9.3 mi | 126 mg/L | 36 | 2000–2003 |
Water hardness in towns near Murphy
| Town | Distance | Median | Class |
|---|---|---|---|
| Sachse | 4 mi | 117 mg/L | Moderately hard |
| Wylie | 5 mi | 111 mg/L | Moderately hard |
| Richardson | 7 mi | 212 mg/L | Very hard |
| Allen | 7 mi | 111 mg/L | Moderately hard |
| Garland | 7 mi | 118 mg/L | Moderately hard |
| Rowlett | 8 mi | 118 mg/L | Moderately hard |
| Plano | 8 mi | 212 mg/L | Very hard |
| Fairview | 9 mi | 113 mg/L | Moderately hard |
| Rockwall | 12 mi | 118 mg/L | Moderately hard |
| McKinney | 13 mi | 111 mg/L | Moderately hard |
Collin County
Murphy is in Collin County, where the median is 111 mg/L (moderately hard) across 7 sites.
See all of Collin County →Murphy, TX water: common questions
Do I need a water softener in Murphy?
Many homes here use one. Water measured around Murphy is 7.2 gpg (124 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 13,000 grains.Size it for your household →
Who supplies Murphy's drinking water?
The main public water system serving Murphy in EPA records is City of Murphy. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Murphy?
It depends on what you want to remove. In Murphy, EPA testing found PFBA, PFPeA and PFHxA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 4 PFAS in Murphy's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.