Water hardness in Friendswood, TX

Water in Friendswood is very hard, with a median of 189 mg/L (11 grains per gallon) across 55 monitoring sites within 10 miles.

about the same as the Texas median (194 mg/L) 112th hardest of 251 Texas towns Population 40,826
189mg/L
11 grains per gallon
Very hard

Friendswood tap water at a glance

  • HardnessVery hard (189 mg/L, 11 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 189 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 11 gpg (10.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites55
Lab samples559
Sample years2000–2013
Middle 50% of sites142–264 mg/L
Groundwater (wells, springs)77 mg/L · 4 sites
Surface water (rivers, lakes)200 mg/L · 51 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Friendswood

Prefilled with Friendswood's measured local hardness of 189 mg/L (11.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Friendswood tap water

City of Friendswood is the main public water system for Friendswood. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 20 samples taken Jun 2024 – Mar 2025. 3 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
6.4 ppt 5 of 20 samples —
PFPeA
perfluoropentanoic acid
4.8 ppt 4 of 20 samples —
PFHxA
perfluorohexanoic acid
4.4 ppt 4 of 20 samples —

Other water systems serving parts of Friendswood

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Houston
serves over 10,000 people
6:2 FTS, PFBA, PFPeA +1 more — Feb 2023 – Feb 2025
City of Pearland
serves over 10,000 people
PFPeA, PFBA, PFHxA +3 more ND / 4.4 ppt Jan 2025 – Oct 2025
City of League City
serves over 10,000 people
PFPeA, PFBA, PFHxA +3 more ND / 4.8 ppt Dec 2024 – Mar 2026
Clear Lake City Water Authority
serves over 10,000 people
PFBA, PFHxA, PFPeA +5 more 4 / 6.7 ppt Apr 2023 – Mar 2024
City of Webster
serves over 10,000 people
PFBA, PFPeA, PFHxA +4 more ND / 6.2 ppt Sep 2023 – Aug 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Friendswood

City of Friendswood reported 14,009 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
14,009not lead (100%)

Other water systems serving parts of Friendswood

Water systemService linesTotal
City of Houston0 lead · 0 galvanized · 427,111 unknown508,198
City of Pearland0 lead · 244 galvanized · 0 unknown38,943
City of League City0 lead · 194 galvanized · 0 unknown36,981
Clear Lake City Water Authority0 lead · 1 galvanized · 59 unknown17,797
City of Webster0 lead · 57 galvanized · 0 unknown1,999

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Friendswood drinking water violations

EPA records show no health-based violations for City of Friendswood since 2016.

Other water systems serving parts of Friendswood

Water systemHealth-based violationsMonitoring/reporting
City of Houston11
City of PearlandNone8
City of League CityNone4
Clear Lake City Water AuthorityNone2
City of WebsterNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Friendswood

SiteTypeDistanceMedianSamplesYears
CHIGGER CREEK AT FM528 BRIDGE
Texas Commission on Environmental Quality
River/Stream 0.5 mi207 mg/L62002–2003
COWART CREEK AT SUNSET DRIVE
Texas Commission on Environmental Quality
River/Stream 0.9 mi124 mg/L52002–2003
COWART CREEK NEAR ARBRE LANE
Texas Commission on Environmental Quality
River/Stream 1.1 mi158 mg/L62002–2003
CHIGGER CREEK AT OAK DRIVE
Texas Commission on Environmental Quality
River/Stream 1.3 mi164 mg/L62002–2003
CLEAR CK AT FRIENDSWOOD LINK
Texas Commission on Environmental Quality
River/Stream 1.4 mi140 mg/L62002–2003
CLEAR CREEK TIDAL AT FM528
Texas Commission on Environmental Quality
River/Stream 1.5 mi142 mg/L62002–2003

Water hardness in towns near Friendswood

TownDistanceMedianClass
Webster5 mi 216 mg/LVery hard
League City6 mi 206 mg/LVery hard
Alvin6 mi 162 mg/LHard
Pearland8 mi 160 mg/LHard
Dickinson10 mi 234 mg/LVery hard
Manvel10 mi 160 mg/LHard
Santa Fe10 mi 228 mg/LVery hard
Pasadena11 mi 222 mg/LVery hard
South Houston11 mi 164 mg/LHard
Deer Park13 mi 334 mg/LVery hard

Galveston County

Friendswood is in Galveston County, where the median is 259 mg/L (very hard) across 44 sites.

See all of Galveston County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Friendswood, TX water: common questions

Do I need a water softener in Friendswood?

Very likely. Water measured around Friendswood is 11 gpg (189 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 19,000 grains.Size it for your household →

Who supplies Friendswood's drinking water?

The main public water system serving Friendswood in EPA records is City of Friendswood. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Friendswood?

It depends on what you want to remove. In Friendswood, EPA testing found PFBA, PFPeA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next