Water hardness in Bedford Heights, OH
Water in Bedford Heights is very hard, with a median of 212 mg/L (12.4 grains per gallon) across 91 monitoring sites within 10 miles.
Bedford Heights tap water at a glance
- HardnessVery hard (212 mg/L, 12.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 212 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.4 gpg (11.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Bedford Heights
Prefilled with Bedford Heights's measured local hardness of 212 mg/L (12.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Bedford Heights tap water
Bedford Heights is served by more than one water system. These systems supply ZIP codes in Bedford Heights and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.
Water systems serving Bedford Heights
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Cleveland Public Water System serves over 10,000 people | None detected | — | Sep 2024 – Jun 2025 |
| Bedford City PWS serves over 10,000 people | None detected | — | Aug 2024 – May 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Bedford Heights
Bedford Heights is served by more than one water system. Their service line inventories, as reported to EPA:
Water systems serving Bedford Heights
| Water system | Service lines | Total |
|---|---|---|
| Cleveland Public Water System | 144,193 lead · 528 galvanized · 56,954 unknown | 434,395 |
| Bedford City PWS | 13 lead · 19 galvanized · 4,449 unknown | 5,053 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Bedford Heights drinking water violations
Bedford Heights is served by more than one water system. Health-based violations recorded by EPA since 2016:
Water systems serving Bedford Heights
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Cleveland Public Water System | None | 9 |
| Bedford City PWS | None | 3 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Bedford Heights
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| BEAR CREEK W OF I-271 @ SOLON RD. Division of Surface water (Ohio) (State) | River/Stream | 1.4 mi | 247 mg/L | 11 | 2000–2018 |
| TINKERS CREEK DST. HAWTHORN CREEK Division of Surface water (Ohio) (State) | River/Stream | 1.4 mi | 189 mg/L | 10 | 2000 |
| HAWTHORNE CREEK @ RICHMOND RD. Division of Surface water (Ohio) (State) | River/Stream | 1.6 mi | 264 mg/L | 44 | 2000–2018 |
| TINKERS CREEK NEAR BEDFORD, UPST. FALLS Division of Surface water (Ohio) (State) | River/Stream | 1.7 mi | 225 mg/L | 4 | 2011–2012 |
| TINKERS CREEK AT BEDFORD @ ST. RT. 14 Division of Surface water (Ohio) (State) | River/Stream | 1.9 mi | 217 mg/L | 60 | 2001–2024 |
| TINKERS CREEK AT GLEN WILLOW, DST. RICHMOND RD. Division of Surface water (Ohio) (State) | River/Stream | 2 mi | 201 mg/L | 15 | 2000–2018 |
Water hardness in towns near Bedford Heights
| Town | Distance | Median | Class |
|---|---|---|---|
| Bedford | 2 mi | 210 mg/L | Very hard |
| Warrensville Heights | 3 mi | 206 mg/L | Very hard |
| Maple Heights | 3 mi | 213 mg/L | Very hard |
| Solon | 3 mi | 216 mg/L | Very hard |
| Beachwood | 5 mi | 200 mg/L | Very hard |
| Garfield Heights | 5 mi | 213 mg/L | Very hard |
| Shaker Heights | 6 mi | 203 mg/L | Very hard |
| Macedonia | 6 mi | 224 mg/L | Very hard |
| Twinsburg | 6 mi | 222 mg/L | Very hard |
| University Heights | 6 mi | 200 mg/L | Very hard |
Cuyahoga County
Bedford Heights is in Cuyahoga County, where the median is 201 mg/L (very hard) across 148 sites.
See all of Cuyahoga County →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.