Water hardness in Seward County, NE
Water in Seward County is very hard, with a median of 236 mg/L (13.8 grains per gallon) across 12 monitoring sites.
Seward County water at a glance
- HardnessVery hard (236 mg/L, 13.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 236 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 13.8 gpg (13.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Seward County
Prefilled with Seward County's measured local hardness of 236 mg/L (13.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Seward County on the Nebraska map
Cities and communities in Seward County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Seward | 235 | Very hard | 11 sites within 10 miles |
| Milford | 236 | Very hard | county median |
| Utica | 238 | Very hard | 12 sites within 10 miles |
| Beaver Crossing | 224 | Very hard | 5 sites within 10 miles |
| Staplehurst | 236 | Very hard | 10 sites within 10 miles |
| Pleasant Dale | 135 | Hard | 6 sites within 10 miles |
| Garland | 234 | Very hard | 8 sites within 10 miles |
| Goehner | 236 | Very hard | 10 sites within 10 miles |
| Bee | 255 | Very hard | 9 sites within 10 miles |
| Cordova | 230 | Very hard | 3 sites within 10 miles |
| Tamora (CDP) | 236 | Very hard | 10 sites within 10 miles |
Water quality in Seward County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Seward | City of Seward | None detected | 2 lead · 159 unknown | None |
| Milford | City of Milford | Not tested | 1 lead · 100 unknown | 3 |
| Utica | Village of Utica | Not tested | 0 lead · 2 unknown | 1 |
| Beaver Crossing | Village of Beaver Crossing | Not tested | 0 lead · 180 unknown | None |
| Staplehurst | Village of Staplehurst | Not tested | 1 lead · 104 unknown | None |
| Pleasant Dale | Village of Pleasant Dale | Not tested | 0 lead · 0 unknown | None |
| Garland | Village of Garland | Not tested | 0 lead · 0 unknown | None |
| Goehner | Village of Goehner | Not tested | 0 lead · 33 unknown | 1 |
| Bee | Village of Bee | Not tested | 0 lead · 6 unknown | None |
| Cordova | Village of Cordova | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- York County286 mg/L
- Lancaster County282 mg/L
- Butler County227 mg/L
- Saline County230 mg/L
- Polk County308 mg/L
- Fillmore County274 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.