Water hardness in Phelps County, NE
Water in Phelps County is very hard, with a median of 245 mg/L (14.3 grains per gallon) across 1 monitoring site.
Phelps County water at a glance
- HardnessVery hard (245 mg/L, 14.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 245 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.3 gpg (13.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Phelps County
Prefilled with Phelps County's measured local hardness of 245 mg/L (14.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Phelps County on the Nebraska map
Cities and communities in Phelps County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Holdrege | 245 | Very hard | county median |
| Bertrand | 245 | Very hard | county median |
| Loomis | 245 | Very hard | county median |
| Funk | 245 | Very hard | county median |
| Atlanta | 245 | Very hard | county median |
Water quality in Phelps County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Holdrege | City of Holdrege | None detected | 236 lead · 1,214 unknown | 1 |
| Bertrand | Village of Bertrand | Not tested | 0 lead · 0 unknown | None |
| Loomis | Village of Loomis | Not tested | 0 lead · 0 unknown | None |
| Funk | Village of Funk | Not tested | 0 lead · 0 unknown | 1 |
| Atlanta | Village of Atlanta | Not tested | 0 lead · 47 unknown | 1 |
Neighboring counties
- Gosper County234 mg/L
- Harlan County237 mg/L
- Kearney County298 mg/L
- Buffalo County237 mg/L
- Dawson County366 mg/L
- Franklin County198 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.