Water hardness in Ashland, KY

Water in Ashland is hard, with a median of 174 mg/L (10.2 grains per gallon) across 3 monitoring sites within 10 miles.

36% harder than the Kentucky median (128 mg/L) 19th hardest of 35 Kentucky towns Population 21,154
174mg/L
10.2 grains per gallon
Hard

Ashland tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 174 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 10.2 gpg (9.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites3
Lab samples66
Sample years2002–2007
Middle 50% of sites148–189 mg/L
Surface water (rivers, lakes)174 mg/L · 3 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Ashland

Prefilled with Ashland's measured local hardness of 174 mg/L (10.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Ashland tap water

Ashland Water Works is the main public water system for Ashland. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2024 – Feb 2025. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
24 ppt 2 of 4 samples —

Other water systems serving parts of Ashland

Water systemPFAS detectedHighest PFOA / PFOSTested
Big Sandy Water District
serves over 10,000 people
HFPO-DA, PFBS, PFPeA — Dec 2023 – Oct 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Ashland

Ashland Water Works reported 14,058 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 12,744 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
12,744unknown material (91%)
1,314not lead (9%)

Other water systems serving parts of Ashland

Water systemService linesTotal
Big Sandy Water District0 lead · 0 galvanized · 609 unknown5,077

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Ashland drinking water violations

EPA records show 6 health-based violations for Ashland Water Works since 2016, all since resolved or closed. The most recent began in Apr 2017. It also had 11 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Total trihalomethanes (TTHM)
byproducts formed when chlorine reacts with natural matter in water · what it means
highest measured 0.098 MG/L; limit 0.080 mg/L
Contaminant above legal limit 4 Apr 2017 Resolved/closed
Haloacetic acids (HAA5)
byproducts of chlorine disinfection · what it means
highest measured 0.068 MG/L; limit 0.060 mg/L
Contaminant above legal limit 2 Oct 2016 Resolved/closed

Other water systems serving parts of Ashland

Water systemHealth-based violationsMonitoring/reporting
Big Sandy Water District204

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Ashland

SiteTypeDistanceMedianSamplesYears
HOOD CREEK NEAR ASHLAND
Kentucky Division of Water
River/Stream 2.9 mi204 mg/L202002–2007
EAST FORK LITTLE SANDY RIVER NEAR CANNONSBURG
Kentucky Division of Water
River/Stream 7.2 mi123 mg/L232002–2007
EAST FORK LITTLE SANDY RIVER NEAR DANLEYTON
Kentucky Division of Water
River/Stream 7.6 mi174 mg/L232002–2007

Water hardness in towns near Ashland

TownDistanceMedianClass
Paris90 mi 212 mg/LVery hard
Alexandria100 mi 124 mg/LHard
Richmond103 mi 214 mg/LVery hard
Fort Thomas107 mi 124 mg/LHard
Berea108 mi 214 mg/LVery hard
Newport108 mi 124 mg/LHard
Florence114 mi 128 mg/LHard
Burlington118 mi 128 mg/LHard
Frankfort122 mi 175 mg/LHard
Lawrenceburg126 mi 178 mg/LHard

Boyd County

Ashland is in Boyd County, where the median is 163 mg/L (hard) across 2 sites.

See all of Boyd County →

Kentucky

The statewide median is 128 mg/L (hard) from 372 sites.

Kentucky hardness map →

Ashland, KY water: common questions

Do I need a water softener in Ashland?

Many homes here use one. Water measured around Ashland is 10.2 gpg (174 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 18,000 grains.Size it for your household →

Who supplies Ashland's drinking water?

The main public water system serving Ashland in EPA records is Ashland Water Works. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Ashland?

It depends on what you want to remove. In Ashland, EPA testing found PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 6 health-based violations since 2016, for TTHM and Total Haloacetic Acids (HAA5); the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next