Water hardness in Burlington, IA

Water in Burlington is very hard, with a median of 354 mg/L (20.7 grains per gallon) across Des Moines County.

about the same as the Iowa median (330 mg/L) 15th hardest of 42 Iowa towns Population 23,565
354mg/L
20.7 grains per gallon
Very hard

There are not enough monitoring sites within 10 miles of Burlington, so this page uses the Des Moines County median.

Burlington tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 354 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 20.7 gpg (19.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites2
Lab samples4
Sample years2002–2017
Middle 50% of sites352–357 mg/L
Groundwater (wells, springs)354 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Burlington

Prefilled with Burlington's measured local hardness of 354 mg/L (20.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Burlington tap water

Burlington Municipal Waterworks is the main public water system for Burlington. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Nov 2024 – Sep 2025. 3 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
18 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
6.2 ppt 3 of 4 samples —
PFBS
perfluorobutane sulfonic acid
6.2 ppt 1 of 4 samples —

Other water systems serving parts of Burlington

Water systemPFAS detectedHighest PFOA / PFOSTested
Rathbun Reg Water ASSN (FT Madison)
serves over 10,000 people
PFBA — Dec 2023 – Sep 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Burlington

Burlington Municipal Waterworks reported 12,239 service lines (the pipes connecting homes to the water main) in its inventory. 2 are lead and 2 are galvanized lines that must be replaced.

2lead (<1%)
2galvanized requiring replacement
0unknown material (0%)
12,235not lead (100%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Burlington Municipal Waterworks whether your address is on its list.

Other water systems serving parts of Burlington

Water systemService linesTotal
Rathbun Reg Water ASSN (FT Madison)0 lead · 0 galvanized · 2,938 unknown4,817

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Burlington drinking water violations

EPA records show 1 health-based violation for Burlington Municipal Waterworks since 2016, all since resolved or closed. The most recent began in Jan 2019.

Contaminant or ruleTypeViolationsMost recentStatus
Surface Water Treatment Rule
filtration and disinfection of river and lake water
Treatment requirement not met 1 Jan 2019 Resolved/closed

Other water systems serving parts of Burlington

Water systemHealth-based violationsMonitoring/reporting
Rathbun Reg Water ASSN (FT Madison)None2

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Burlington

SiteTypeDistanceMedianSamplesYears
070N03W34AABA 24618 1978West Burlington 5
USGS Iowa Water Science Center
Well 3.4 mi349 mg/L32005–2017

Water hardness in towns near Burlington

TownDistanceMedianClass
Fort Madison17 mi 220 mg/LVery hard
Muscatine42 mi 232 mg/LVery hard
Davenport58 mi 225 mg/LVery hard
Iowa City62 mi 448 mg/LVery hard
Bettendorf62 mi 220 mg/LVery hard
Coralville66 mi 438 mg/LVery hard
Ottumwa69 mi 393 mg/LVery hard
North Liberty69 mi 436 mg/LVery hard
Clinton85 mi 217 mg/LVery hard
Cedar Rapids85 mi 268 mg/LVery hard

Des Moines County

Burlington is in Des Moines County, where the median is 354 mg/L (very hard) across 2 sites.

See all of Des Moines County →

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Burlington, IA water: common questions

Do I need a water softener in Burlington?

Very likely. Water measured around Burlington is 20.7 gpg (354 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 36,000 grains.Size it for your household →

Who supplies Burlington's drinking water?

The main public water system serving Burlington in EPA records is Burlington Municipal Waterworks. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Burlington?

It depends on what you want to remove. In Burlington, EPA testing found PFBA, PFPeA and PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 2 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Surface Water Treatment Rule; the utility's annual report says what was done about it. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next