Water hardness in Cedar Rapids, IA
Water in Cedar Rapids is very hard, with a median of 268 mg/L (15.7 grains per gallon) across 45 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Cedar Rapids can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Cedar Rapids tap water at a glance
- HardnessVery hard (268 mg/L, 15.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 108 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 268 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 15.7 gpg (15 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Cedar Rapids
Prefilled with Cedar Rapids's measured local hardness of 268 mg/L (15.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Cedar Rapids tap water
Cedar Rapids Water Department is the main public water system for Cedar Rapids. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Jan 2023 – Oct 2023. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Cedar Rapids
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Marion Municipal Water Dept serves over 10,000 people | None detected | — | Jul 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Cedar Rapids
Cedar Rapids Water Department reported 54,425 service lines (the pipes connecting homes to the water main) in its inventory. 108 are lead and 2,387 are galvanized lines that must be replaced, and 4,949 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Cedar Rapids Water Department whether your address is on its list.
Other water systems serving parts of Cedar Rapids
| Water system | Service lines | Total |
|---|---|---|
| Marion Municipal Water Dept | 69 lead · 101 galvanized · 1,025 unknown | 14,888 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Cedar Rapids drinking water violations
EPA records show no health-based violations for Cedar Rapids Water Department since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Cedar Rapids
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Marion Municipal Water Dept | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Cedar Rapids
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| 083N07W29AAC 1996NAWQA City of Cedar Rapids USGS Iowa Water Science Center | Well | 0.6 mi | 607 mg/L | 1 | 2019 |
| 083N07W27BBC 1996NAWQA City of Cedar Rapids USGS Iowa Water Science Center | Well | 1.2 mi | 403 mg/L | 1 | 2019 |
| 083N07W17DACD 37819 1961Cedar Rapids East 3 USGS Iowa Water Science Center | Well: Multiple wells | 2.2 mi | 290 mg/L | 1 | 2004 |
| 083N07W17DACC 1993USGS CRM-1 USGS Iowa Water Science Center | Well | 2.2 mi | 254 mg/L | 13 | 2000–2003 |
| 083N07W07DDBD 1993USGS CRM-2 USGS Iowa Water Science Center | Well | 3.2 mi | 261 mg/L | 13 | 2000–2003 |
| 2015USGS GPW4 USGS Iowa Water Science Center | Well: Collector or Ranney type well | 3.3 mi | 252 mg/L | 3 | 2022–2023 |
Water hardness in towns near Cedar Rapids
| Town | Distance | Median | Class |
|---|---|---|---|
| Marion | 7 mi | 268 mg/L | Very hard |
| North Liberty | 16 mi | 436 mg/L | Very hard |
| Coralville | 19 mi | 438 mg/L | Very hard |
| Iowa City | 23 mi | 448 mg/L | Very hard |
| Muscatine | 49 mi | 232 mg/L | Very hard |
| Waterloo | 50 mi | 251 mg/L | Very hard |
| Cedar Falls | 55 mi | 254 mg/L | Very hard |
| Dubuque | 62 mi | 200 mg/L | Very hard |
| Davenport | 62 mi | 225 mg/L | Very hard |
| Marshalltown | 63 mi | 362 mg/L | Very hard |
Linn County
Cedar Rapids is in Linn County, where the median is 268 mg/L (very hard) across 49 sites.
See all of Linn County →Cedar Rapids, IA water: common questions
Do I need a water softener in Cedar Rapids?
Very likely. Water measured around Cedar Rapids is 15.7 gpg (268 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 28,000 grains.Size it for your household →
Who supplies Cedar Rapids's drinking water?
The main public water system serving Cedar Rapids in EPA records is Cedar Rapids Water Department. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Cedar Rapids?
It depends on what you want to remove. In Cedar Rapids, the system reports 108 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe108 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.