Water hardness in Wilmette, IL

Water in Wilmette is very hard, with a median of 222 mg/L (13 grains per gallon) across 17 monitoring sites within 10 miles.

24% softer than the Illinois median (293 mg/L) 204th hardest of 225 Illinois towns Population 27,026
222mg/L
13 grains per gallon
Very hard

Wilmette tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 222 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13 gpg (12.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites17
Lab samples123
Sample years2000–2004
Middle 50% of sites145–269 mg/L
Surface water (rivers, lakes)222 mg/L · 17 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Wilmette

Prefilled with Wilmette's measured local hardness of 222 mg/L (13 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Wilmette tap water

The City of Wilmette water system is the main public water system for Wilmette. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jun 2024 – Mar 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Wilmette

Water systemPFAS detectedHighest PFOA / PFOSTested
Winnetka
serves over 10,000 people
None detected — Jan 2025 – Oct 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Wilmette

The City of Wilmette water system reported 8,863 service lines (the pipes connecting homes to the water main) in its inventory. 1,748 are lead and 232 are galvanized lines that must be replaced, and 310 are still of unknown material.

1,748lead (20%)
232galvanized requiring replacement
310unknown material (3%)
6,573not lead (74%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Wilmette water system whether your address is on its list.

Other water systems serving parts of Wilmette

Water systemService linesTotal
Winnetka1,219 lead · 0 galvanized · 0 unknown4,446

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Wilmette drinking water violations

EPA records show no health-based violations for the City of Wilmette water system since 2016. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Wilmette

Water systemHealth-based violationsMonitoring/reporting
WinnetkaNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Wilmette

SiteTypeDistanceMedianSamplesYears
Skokie River
illinois epa (State)
River/Stream 2.3 mi231 mg/L32001
NORTH BRANCH CHICAGO RIVER AT GLENVIEW, IL
USGS Illinois Water Science Center
Stream 2.4 mi207 mg/L12004
Middle Fork North Branch Chicago River
illinois epa (State)
River/Stream 2.9 mi255 mg/L32001
Lake Michigan
illinois epa (State)
Great Lake 3.5 mi132 mg/L92000–2001
North Shore Channel
illinois epa (State)
River/Stream 3.7 mi145 mg/L32001
Lake Michigan
illinois epa (State)
Great Lake 4.2 mi132 mg/L62000

Water hardness in towns near Wilmette

TownDistanceMedianClass
Winnetka2 mi 214 mg/LVery hard
Evanston3 mi 222 mg/LVery hard
Skokie3 mi 231 mg/LVery hard
Morton Grove4 mi 226 mg/LVery hard
Lincolnwood5 mi 222 mg/LVery hard
Glenview5 mi 244 mg/LVery hard
Niles5 mi 226 mg/LVery hard
Northbrook7 mi 244 mg/LVery hard
Park Ridge7 mi 255 mg/LVery hard
Highland Park8 mi 222 mg/LVery hard

Cook County

Wilmette is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.

See all of Cook County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Wilmette, IL water: common questions

Do I need a water softener in Wilmette?

Very likely. Water measured around Wilmette is 13 gpg (222 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →

Who supplies Wilmette's drinking water?

The main public water system serving Wilmette in EPA records is Wilmette. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Wilmette?

It depends on what you want to remove. In Wilmette, the system reports 1,748 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next