Water hardness in Park Ridge, IL
Water in Park Ridge is very hard, with a median of 255 mg/L (14.9 grains per gallon) across 17 monitoring sites within 10 miles.
Park Ridge tap water at a glance
- HardnessVery hard (255 mg/L, 14.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 2,594 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 255 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.9 gpg (14.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Park Ridge
Prefilled with Park Ridge's measured local hardness of 255 mg/L (14.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Park Ridge tap water
The City of Park Ridge water system is the main public water system for Park Ridge. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jul 2023 – Nov 2023. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Park Ridge
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Des Plaines serves over 10,000 people | None detected | — | May 2024 – Feb 2025 |
| Aqua Illinois-North Maine Utilities serves over 10,000 people | None detected | — | May 2023 – Feb 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Park Ridge
The City of Park Ridge water system reported 12,647 service lines (the pipes connecting homes to the water main) in its inventory. 2,594 are lead and 0 are galvanized lines that must be replaced, and 7,191 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Park Ridge water system whether your address is on its list.
Other water systems serving parts of Park Ridge
| Water system | Service lines | Total |
|---|---|---|
| Des Plaines | 1,607 lead · 1,824 galvanized · 6,835 unknown | 16,665 |
| Aqua Illinois-North Maine Utilities | 36 lead · 208 galvanized · 2,973 unknown | 4,829 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Park Ridge drinking water violations
EPA records show no health-based violations for the City of Park Ridge water system since 2016. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Park Ridge
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Des Plaines | None | 5 |
| Aqua Illinois-North Maine Utilities | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Park Ridge
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| WILLOW CREEK AT DES PLAINES R RD NR ROSEMONT, IL USGS Illinois Water Science Center | Stream | 1.7 mi | 270 mg/L | 1 | 2000 |
| North Branch Chicago River illinois epa (State) | River/Stream | 2.5 mi | 280 mg/L | 24 | 2000–2002 |
| Des Plaines River illinois epa (State) | River/Stream | 4.1 mi | 286 mg/L | 24 | 2000–2002 |
| Des Plaines River illinois epa (State) | River/Stream | 4.3 mi | 312 mg/L | 23 | 2000–2002 |
| Middle Fork North Branch Chicago River illinois epa (State) | River/Stream | 4.6 mi | 255 mg/L | 3 | 2001 |
| NORTH BRANCH CHICAGO RIVER AT GLENVIEW, IL USGS Illinois Water Science Center | Stream | 5.3 mi | 207 mg/L | 1 | 2004 |
Water hardness in towns near Park Ridge
| Town | Distance | Median | Class |
|---|---|---|---|
| Niles | 2 mi | 226 mg/L | Very hard |
| Des Plaines | 3 mi | 255 mg/L | Very hard |
| Norridge | 3 mi | 270 mg/L | Very hard |
| Morton Grove | 3 mi | 226 mg/L | Very hard |
| Schiller Park | 4 mi | 275 mg/L | Very hard |
| Glenview | 5 mi | 244 mg/L | Very hard |
| Franklin Park | 6 mi | 276 mg/L | Very hard |
| Skokie | 6 mi | 231 mg/L | Very hard |
| Lincolnwood | 6 mi | 222 mg/L | Very hard |
| Mount Prospect | 6 mi | 262 mg/L | Very hard |
Cook County
Park Ridge is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.
See all of Cook County →Park Ridge, IL water: common questions
Do I need a water softener in Park Ridge?
Very likely. Water measured around Park Ridge is 14.9 gpg (255 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 26,000 grains.Size it for your household →
Who supplies Park Ridge's drinking water?
The main public water system serving Park Ridge in EPA records is Park Ridge. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Park Ridge?
It depends on what you want to remove. In Park Ridge, the system reports 2,594 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe2,594 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.