Water hardness in Troy, IL
Water in Troy is very hard, with a median of 441 mg/L (25.7 grains per gallon) across 18 monitoring sites within 10 miles.
Troy tap water at a glance
- HardnessVery hard (441 mg/L, 25.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 441 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 25.7 gpg (24.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Troy
Prefilled with Troy's measured local hardness of 441 mg/L (25.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Troy tap water
The City of Troy water system is the main public water system for Troy. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Sep 2024 – Mar 2025. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBS perfluorobutane sulfonic acid | 3.9 ppt | 1 of 2 samples | — |
Other water systems serving parts of Troy
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Caseyville serves over 10,000 people | PFBA | — | Oct 2024 – Jul 2025 |
| Glen Carbon serves over 10,000 people | PFBA, PFHxA, PFPeA | — | Aug 2023 – Jun 2024 |
| Collinsville serves over 10,000 people | PFHxA, PFPeA, PFOA +5 more | 18 / 8.9 ppt | Feb 2024 – Aug 2024 |
| IL American-Granite City serves over 10,000 people | PFBA, PFPeA, PFHxA | — | Nov 2023 – Aug 2024 |
| IL American-East ST Louis serves over 10,000 people | PFBA, PFHxA, PFPeA | — | Nov 2023 – Aug 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Troy
The City of Troy water system reported 6,762 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Troy
| Water system | Service lines | Total |
|---|---|---|
| Caseyville | 0 lead · 0 galvanized · 0 unknown | 6,239 |
| Glen Carbon | 1 lead · 70 galvanized · 151 unknown | 5,588 |
| Collinsville | 23 lead · 0 galvanized · 451 unknown | 12,587 |
| IL American-Granite City | 697 lead · 130 galvanized · 12,306 unknown | 21,217 |
| IL American-East ST Louis | 749 lead · 351 galvanized · 34,431 unknown | 71,163 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Troy drinking water violations
EPA records show no health-based violations for the City of Troy water system since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Troy
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Caseyville | None | 4 |
| Glen Carbon | None | 5 |
| Collinsville | None | 0 |
| IL American-Granite City | None | 1 |
| IL American-East ST Louis | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Troy
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Troy Creek illinois epa (State) | River/Stream | 1.1 mi | 490 mg/L | 1 | 2002 |
| Trojan Creek illinois epa (State) | River/Stream | 1.2 mi | 486 mg/L | 1 | 2002 |
| Troy Creek illinois epa (State) | River/Stream | 1.5 mi | 489 mg/L | 1 | 2002 |
| Wendell Branch illinois epa (State) | River/Stream | 1.5 mi | 197 mg/L | 1 | 2002 |
| Wendell Branch illinois epa (State) | River/Stream | 1.6 mi | 290 mg/L | 1 | 2002 |
| Silver Creek illinois epa (State) | River/Stream | 3.3 mi | 278 mg/L | 31 | 2000–2003 |
Water hardness in towns near Troy
| Town | Distance | Median | Class |
|---|---|---|---|
| Glen Carbon | 6 mi | 416 mg/L | Very hard |
| Edwardsville | 7 mi | 396 mg/L | Very hard |
| Collinsville | 8 mi | 416 mg/L | Very hard |
| O'Fallon | 10 mi | 372 mg/L | Very hard |
| Fairview Heights | 12 mi | 363 mg/L | Very hard |
| Shiloh | 13 mi | 348 mg/L | Very hard |
| Granite City | 13 mi | 398 mg/L | Very hard |
| Wood River | 14 mi | 358 mg/L | Very hard |
| Swansea | 14 mi | 368 mg/L | Very hard |
| East St. Louis | 16 mi | 386 mg/L | Very hard |
Madison County
Troy is in Madison County, where the median is 339 mg/L (very hard) across 34 sites.
See all of Madison County →Troy, IL water: common questions
Do I need a water softener in Troy?
Very likely. Water measured around Troy is 25.7 gpg (441 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 45,000 grains.Size it for your household →
Who supplies Troy's drinking water?
The main public water system serving Troy in EPA records is TROY. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Troy?
It depends on what you want to remove. In Troy, EPA testing found PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Troy's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.