Water hardness in Park Forest, IL

Water in Park Forest is very hard, with a median of 282 mg/L (16.5 grains per gallon) across 11 monitoring sites within 10 miles.

about the same as the Illinois median (293 mg/L) 112th hardest of 225 Illinois towns Population 20,763
282mg/L
16.5 grains per gallon
Very hard

Park Forest tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 282 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16.5 gpg (15.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites11
Lab samples44
Sample years2000–2002
Middle 50% of sites258–380 mg/L
Surface water (rivers, lakes)282 mg/L · 11 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Park Forest

Prefilled with Park Forest's measured local hardness of 282 mg/L (16.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Park Forest tap water

The City of Park Forest water system is the main public water system for Park Forest. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Jan 2025 – Jul 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Park Forest

Water systemPFAS detectedHighest PFOA / PFOSTested
Matteson
serves over 10,000 people
None detected — Jul 2024 – Apr 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Park Forest

The City of Park Forest water system reported 9,100 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
9,100not lead (100%)

Other water systems serving parts of Park Forest

Water systemService linesTotal
Matteson576 lead · 4 galvanized · 0 unknown7,010

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Park Forest drinking water violations

EPA records show 1 health-based violation for the City of Park Forest water system since 2016, all since resolved or closed. The most recent began in Jul 2019. It also had 32 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Coliform bacteria / E. coli (Revised Total Coliform Rule)
bacteria that signal possible contamination of the system · what it means
Contaminant above legal limit 1 Jul 2019 Resolved/closed

Other water systems serving parts of Park Forest

Water systemHealth-based violationsMonitoring/reporting
MattesonNone12

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Park Forest

SiteTypeDistanceMedianSamplesYears
Thorn Creek
illinois epa (State)
River/Stream 1 mi370 mg/L32001
Thorn Creek
illinois epa (State)
River/Stream 2.7 mi572 mg/L32001
BUTTERFIELD C AT COUNTRY CLUB RD NR FLOSSMOOR, IL
USGS Illinois Water Science Center
Stream 2.8 mi180 mg/L12000
Butterfield Creek
illinois epa (State)
River/Stream 4.5 mi182 mg/L32001
Deer Creek
illinois epa (State)
River/Stream 6 mi280 mg/L32001
DEER CREEK NEAR GLENWOOD, IL
USGS Illinois Water Science Center
Stream 6 mi239 mg/L12000

Water hardness in towns near Park Forest

TownDistanceMedianClass
Richton Park3 mi 282 mg/LVery hard
Chicago Heights3 mi 278 mg/LVery hard
Matteson4 mi 239 mg/LVery hard
Homewood6 mi 239 mg/LVery hard
Country Club Hills6 mi 232 mg/LVery hard
Hazel Crest6 mi 236 mg/LVery hard
Markham8 mi 232 mg/LVery hard
Tinley Park9 mi 206 mg/LVery hard
Harvey9 mi 232 mg/LVery hard
South Holland9 mi 232 mg/LVery hard

Will County

Park Forest is in Will County, where the median is 280 mg/L (very hard) across 38 sites.

See all of Will County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Park Forest, IL water: common questions

Do I need a water softener in Park Forest?

Very likely. Water measured around Park Forest is 16.5 gpg (282 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →

Who supplies Park Forest's drinking water?

The main public water system serving Park Forest in EPA records is Park Forest. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Park Forest?

It depends on what you want to remove. In Park Forest, the system had 1 health-based violation since 2016, for the Revised Total Coliform Rule; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next