Water hardness in Logan County, IL
Water in Logan County is very hard, with a median of 340 mg/L (19.9 grains per gallon) across 4 monitoring sites.
Logan County water at a glance
- HardnessVery hard (340 mg/L, 19.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 340 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 19.9 gpg (19 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Logan County
Prefilled with Logan County's measured local hardness of 340 mg/L (19.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Logan County on the Illinois map
Cities and communities in Logan County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Lincoln | 333 | Very hard | 3 sites within 10 miles |
| Atlanta | 307 | Very hard | 7 sites within 10 miles |
| Mount Pulaski | 340 | Very hard | county median |
| Emden | 309 | Very hard | 3 sites within 10 miles |
| Elkhart | 340 | Very hard | county median |
| Latham | 340 | Very hard | county median |
| Middletown | 340 | Very hard | county median |
| New Holland | 340 | Very hard | county median |
| Hartsburg | 340 | Very hard | county median |
| Chestnut (CDP) | 302 | Very hard | 4 sites within 10 miles |
| Beason (CDP) | 333 | Very hard | 6 sites within 10 miles |
| Broadwell | 348 | Very hard | 3 sites within 10 miles |
| Cornland (CDP) | 340 | Very hard | county median |
Water quality in Logan County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Lincoln | IL American - Lincoln | 5 found (PFOA 5.7 / PFOS ND ppt) | 5 lead · 2,455 unknown | 1 |
| Atlanta | Atlanta | Not tested | 0 lead · 0 unknown | 7 |
| Emden | Emden | Not tested | 0 lead · 0 unknown | None |
| Elkhart | Elkhart | Not tested | 0 lead · 0 unknown | 1 |
| Latham | Latham | Not tested | 0 lead · 123 unknown | None |
| Middletown | Middletown | Not tested | 0 lead · 103 unknown | 1 |
| New Holland | New Holland | Not tested | 0 lead · 10 unknown | None |
| Hartsburg | Hartsburg | Not tested | 0 lead · 0 unknown | None |
| Broadwell | Broadwell | Not tested | 0 lead · 30 unknown | None |
Neighboring counties
- Menard County282 mg/L
- De Witt County282 mg/L
- Tazewell County340 mg/L
- Macon County295 mg/L
- Mason County326 mg/L
- Sangamon County264 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.