Water hardness in Lisle, IL

Water in Lisle is very hard, with a median of 288 mg/L (16.8 grains per gallon) across 12 monitoring sites within 10 miles.

about the same as the Illinois median (293 mg/L) 96th hardest of 225 Illinois towns Population 23,222
288mg/L
16.8 grains per gallon
Very hard

Lisle tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 288 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16.8 gpg (16.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites12
Lab samples163
Sample years2000–2017
Middle 50% of sites244–307 mg/L
Groundwater (wells, springs)189 mg/L · 2 sites
Surface water (rivers, lakes)296 mg/L · 10 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Lisle

Prefilled with Lisle's measured local hardness of 288 mg/L (16.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Lisle tap water

The City of Lisle water system is the main public water system for Lisle. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Oct 2024 – Jul 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Lisle

Water systemPFAS detectedHighest PFOA / PFOSTested
Woodridge
serves over 10,000 people
None detected — Oct 2024 – Jul 2025
IL American-West Suburban
serves over 10,000 people
None detected — Nov 2023 – Aug 2024
Naperville
serves over 10,000 people
None detected — Jan 2024 – Oct 2024
Downers Grove
serves over 10,000 people
None detected — May 2025 – Feb 2026
Westmont
serves over 10,000 people
None detected — Dec 2024 – Sep 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Lisle

The City of Lisle water system reported 6,129 service lines (the pipes connecting homes to the water main) in its inventory. 10 are lead and 15 are galvanized lines that must be replaced, and 1 are still of unknown material.

10lead (<1%)
15galvanized requiring replacement
1unknown material (<1%)
6,103not lead (100%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Lisle water system whether your address is on its list.

Other water systems serving parts of Lisle

Water systemService linesTotal
Woodridge0 lead · 0 galvanized · 94 unknown9,902
IL American-West Suburban0 lead · 0 galvanized · 0 unknown24,705
Naperville265 lead · 28 galvanized · 29 unknown47,379
Downers Grove802 lead · 146 galvanized · 2,173 unknown17,048
Westmont122 lead · 113 galvanized · 534 unknown6,936

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Lisle drinking water violations

EPA records show no health-based violations for the City of Lisle water system since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Lisle

Water systemHealth-based violationsMonitoring/reporting
WoodridgeNone1
IL American-West SuburbanNone0
NapervilleNone16
Downers GroveNone2
WestmontNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Lisle

SiteTypeDistanceMedianSamplesYears
East Branch Du Page River
illinois epa (State)
River/Stream 0.7 mi306 mg/L242000–2002
West Branch Du Page River
illinois epa (State)
River/Stream 5.2 mi302 mg/L252000–2002
EAST BRANCH DU PAGE RIVER NEAR NAPERVILLE, IL
USGS Illinois Water Science Center
Stream 6 mi310 mg/L12000
WB DUPAGE R AT GARYS MILL RD NR WEST CHICAGO, IL
USGS Illinois Water Science Center
Stream 7.1 mi252 mg/L12000
37N9E-12.8c1
USGS Illinois Water Science Center
Well 7.5 mi221 mg/L12014
Du Page River
illinois epa (State)
River/Stream 8.1 mi308 mg/L82000

Water hardness in towns near Lisle

TownDistanceMedianClass
Downers Grove3 mi 276 mg/LVery hard
Woodridge4 mi 276 mg/LVery hard
Wheaton5 mi 287 mg/LVery hard
Naperville5 mi 306 mg/LVery hard
Glen Ellyn5 mi 287 mg/LVery hard
Warrenville6 mi 294 mg/LVery hard
Westmont6 mi 277 mg/LVery hard
Darien6 mi 276 mg/LVery hard
Lombard7 mi 286 mg/LVery hard
Winfield7 mi 287 mg/LVery hard

DuPage County

Lisle is in DuPage County, where the median is 287 mg/L (very hard) across 5 sites.

See all of DuPage County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Lisle, IL water: common questions

Do I need a water softener in Lisle?

Very likely. Water measured around Lisle is 16.8 gpg (288 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →

Who supplies Lisle's drinking water?

The main public water system serving Lisle in EPA records is Lisle. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Lisle?

It depends on what you want to remove. In Lisle, the system reports 10 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next