Water hardness in Jacksonville, IL
Water in Jacksonville is very hard, with a median of 259 mg/L (15.1 grains per gallon) across 4 monitoring sites within 10 miles.
Jacksonville tap water at a glance
- HardnessVery hard (259 mg/L, 15.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesThe water system reported 3,391 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 259 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 15.1 gpg (14.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Jacksonville
Prefilled with Jacksonville's measured local hardness of 259 mg/L (15.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Jacksonville tap water
The City of Jacksonville water system is the main public water system for Jacksonville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2024 – May 2025. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 9.8 ppt | 4 of 4 samples | — |
Other water systems serving parts of Jacksonville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Alexander Water District serves 10,000 people or fewer | PFBA | — | Jan 2024 – Oct 2024 |
| South Jacksonville serves 10,000 people or fewer | PFBA, PFPeA, PFHxA | — | Feb 2024 – Aug 2024 |
| Curran-Gardner Township PWD serves 10,000 people or fewer | None detected | — | Apr 2024 – Oct 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Jacksonville
The City of Jacksonville water system reported 7,853 service lines (the pipes connecting homes to the water main) in its inventory. 3,391 are lead and 525 are galvanized lines that must be replaced, and 1 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Jacksonville water system whether your address is on its list.
Other water systems serving parts of Jacksonville
| Water system | Service lines | Total |
|---|---|---|
| Alexander Water District | 0 lead · 0 galvanized · 0 unknown | 169 |
| South Jacksonville | 667 lead · 7 galvanized · 0 unknown | 852 |
| Curran-Gardner Township PWD | Not reported | — |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Jacksonville drinking water violations
EPA records show no health-based violations for the City of Jacksonville water system since 2016.
Other water systems serving parts of Jacksonville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Alexander Water District | 4 | 1 |
| South Jacksonville | 1 | 40 |
| Curran-Gardner Township PWD | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Jacksonville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| MAUVAISSE TERRE Illinois EPA | Lake | 1.1 mi | 240 mg/L | 5 | 2002 |
| North Fork Mauvaise Terre Creek illinois epa (State) | River/Stream | 3.9 mi | 303 mg/L | 3 | 2001 |
| JACKSONVILLE Illinois EPA | Lake | 4 mi | 162 mg/L | 5 | 2002 |
| Mauvaise Terre Creek illinois epa (State) | River/Stream | 9.3 mi | 278 mg/L | 28 | 2000–2002 |
Water hardness in towns near Jacksonville
| Town | Distance | Median | Class |
|---|---|---|---|
| Chatham | 29 mi | 249 mg/L | Very hard |
| Springfield | 32 mi | 268 mg/L | Very hard |
| Taylorville | 50 mi | 214 mg/L | Very hard |
| Godfrey | 54 mi | 322 mg/L | Very hard |
| Lincoln | 54 mi | 333 mg/L | Very hard |
| Macomb | 56 mi | 226 mg/L | Very hard |
| Alton | 57 mi | 328 mg/L | Very hard |
| Canton | 59 mi | 320 mg/L | Very hard |
| Wood River | 60 mi | 358 mg/L | Very hard |
| Quincy | 62 mi | 244 mg/L | Very hard |
Morgan County
Jacksonville is in Morgan County, where the median is 234 mg/L (very hard) across 6 sites.
See all of Morgan County →Jacksonville, IL water: common questions
Do I need a water softener in Jacksonville?
Very likely. Water measured around Jacksonville is 15.1 gpg (259 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 27,000 grains.Size it for your household →
Who supplies Jacksonville's drinking water?
The main public water system serving Jacksonville in EPA records is Jacksonville. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Jacksonville?
It depends on what you want to remove. In Jacksonville, EPA testing found PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 3,391 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Jacksonville's main water system.
- How to tell if your home has a lead pipe3,391 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.