Water hardness in Aurora, IL

Water in Aurora is very hard, with a median of 307 mg/L (17.9 grains per gallon) across 13 monitoring sites within 10 miles.

about the same as the Illinois median (293 mg/L) 70th hardest of 225 Illinois towns Population 177,563
307mg/L
17.9 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Aurora can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Aurora tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 307 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.9 gpg (17.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites13
Lab samples89
Sample years2000–2017
Middle 50% of sites275–315 mg/L
Groundwater (wells, springs)236 mg/L · 2 sites
Surface water (rivers, lakes)308 mg/L · 11 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Aurora

Prefilled with Aurora's measured local hardness of 307 mg/L (18 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Aurora tap water

The City of Aurora water system is the main public water system for Aurora. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2024 – Feb 2025. 4 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
5.9 ppt 2 of 4 samples —
PFPeA
perfluoropentanoic acid
5.3 ppt 3 of 4 samples —
PFHxA
perfluorohexanoic acid
4.7 ppt 3 of 4 samples —
PFBS
perfluorobutane sulfonic acid
3.7 ppt 2 of 4 samples —

Other water systems serving parts of Aurora

Water systemPFAS detectedHighest PFOA / PFOSTested
Naperville
serves over 10,000 people
None detected — Jan 2024 – Oct 2024
North Aurora
serves over 10,000 people
None detected — Aug 2024 – Feb 2025
Plainfield
serves over 10,000 people
None detected — Dec 2024 – Sep 2025
Warrenville
serves over 10,000 people
None detected — Oct 2024 – Apr 2025
Batavia
serves over 10,000 people
None detected — Aug 2024 – Feb 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Aurora

The City of Aurora water system reported 50,058 service lines (the pipes connecting homes to the water main) in its inventory. 16,799 are lead and 138 are galvanized lines that must be replaced, and 93 are still of unknown material.

16,799lead (34%)
138galvanized requiring replacement
93unknown material (<1%)
33,028not lead (66%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Aurora water system whether your address is on its list.

Other water systems serving parts of Aurora

Water systemService linesTotal
Naperville265 lead · 28 galvanized · 29 unknown47,379
North Aurora196 lead · 15 galvanized · 357 unknown6,617
Plainfield115 lead · 15 galvanized · 30 unknown14,541
Warrenville0 lead · 0 galvanized · 0 unknown5,022
Batavia723 lead · 41 galvanized · 0 unknown8,642

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Aurora drinking water violations

EPA records show no health-based violations for the City of Aurora water system since 2016.

Other water systems serving parts of Aurora

Water systemHealth-based violationsMonitoring/reporting
NapervilleNone16
North AuroraNone0
PlainfieldNone3
WarrenvilleNone45
BataviaNone2

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Aurora

SiteTypeDistanceMedianSamplesYears
Fox River
illinois epa (State)
River/Stream 3.4 mi307 mg/L212000–2002
MILL CREEK AT MOOSEHEART, IL
USGS Illinois Water Science Center
Stream 4.4 mi315 mg/L12000
39N 8E-26.6h1
USGS Illinois Water Science Center
Well 5.2 mi252 mg/L22007–2017
WAUBANSEE CREEK AT OSWEGO, IL
USGS Illinois Water Science Center
Stream 6.2 mi322 mg/L12000
Fox River
illinois epa (State)
River/Stream 6.4 mi275 mg/L32002
West Branch Du Page River
illinois epa (State)
River/Stream 7.1 mi302 mg/L252000–2002

Water hardness in towns near Aurora

TownDistanceMedianClass
North Aurora4 mi 307 mg/LVery hard
Montgomery5 mi 322 mg/LVery hard
Batavia6 mi 304 mg/LVery hard
Oswego6 mi 318 mg/LVery hard
Warrenville7 mi 294 mg/LVery hard
Naperville7 mi 306 mg/LVery hard
Geneva8 mi 302 mg/LVery hard
Plainfield9 mi 307 mg/LVery hard
West Chicago10 mi 306 mg/LVery hard
Yorkville10 mi 344 mg/LVery hard

DuPage County

Aurora is in DuPage County, where the median is 287 mg/L (very hard) across 5 sites.

See all of DuPage County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Aurora, IL water: common questions

Do I need a water softener in Aurora?

Very likely. Water measured around Aurora is 17.9 gpg (307 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →

Who supplies Aurora's drinking water?

The main public water system serving Aurora in EPA records is Aurora. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Aurora?

It depends on what you want to remove. In Aurora, EPA testing found PFBA, PFPeA and PFHxA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 16,799 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next